Click here to see it fly
Synergy N9 Helicopter SYN-N9 One of the best helicopters in the world !
The Synergy N9 features a low parts count and an ultra-simple build. We made sure that the assembly instructions are among the best in the business. We also promise that if you do need help – you will be able to get it via unsurpassed product support.
Specification

• 690mm-720mm Main Blades
• 105mm Tail Blades
• Enigne Size .61-.91
• Flying Weight 4.71Kg
• Fuel Capacity 650ml
• 1200 E-CCPM
• Tube Drive Tail
• 22mm Tail Boom Diameter
• 12mm Hollow Main Shaft
• 10mm Tail Drive Shaft
• 6mm Tail Output Shaft
• 5mm Flybar

• Rigid G10 Main Frames
• Low Part Count
• Easy assembly and maintenance
• Large one way bearing
• High centre of gravity
• Simple flybar ratio adjustment
• Advanced engine cooling system
• Machined Gears
• Designed by top 3D pilots

Click here to see it fly
KASAMA SRIMOK 90N Helicopter KSM2009590
Specifications:
Length: 1364mm
Height: 403mm
Drive Gear Ratio: 8.25:1:4.66 (E:M:T)
Autorotation Tail Drive Gear: 70T
Main Blade Length: 690-710mm
Main Rotor Diameter: 1560-1600mm
Tail Rotor Diameter: 280mm
Engine Pinion Gear: 12T
Fuel Tank Capacity: 630cc
Weight: 4500-5200g
Features:
All Metal Srimok Rotor Head - 7075 T6 Hub and Grip Grade, 8mm Spindle
Titanium Turnbuckle 3mm Control Rod
High Speed Cooling Fan Hub Vibration Isolated
New Look Fuel Tank Vibration Isolated
Rudder Control Rod Linear Bushing Support Vibration Isolated
Carbon Fiber Tail Boom
Geometrically Correct Full Metal Tail System
Tail Aluminum Shaft Drive w/Concentric Joint
Titanium Tail Boom Support Screws
Metal Servo Horns included
Easily adjustable Bevel Input Pinion
Balance, Damper Mount Canopy Vibration Isolated
Fiberglass Pre-painted Canopy
Carbon Fiber Landing Skids
Aluminum Skid Pipe
Three Main Bearing Block, Two Thrust Bearing
Vibration Isolated Clutch Bearing Block Drive
Vibration Isolated 2mm Carbon Fiber Air Frame
High Speed Swash Plate - 120°CCPM, 10mm Main Shaft
  

http://www.youtube.com/watch?v=jCtwjE-TOC4
Outrage VELOCITY 50 CF Pro Kit KRV501
The new Outrage Velocity 50 nitro - defining the design of advanced 3D RC helicopters. After many hours of designing, testing and refinment, the Velocity 50 is going to be available very soon. This helicopter brings style and functionality together in a harmonius relationship not often achieved.The airframe is light yet strong, and will take all the punishment you throw at it.
The helicopoter is highly tunable to suit your flying style. It is precise yet quick and responsive to follow your every command.
From the fully programmable rotor head to the full metal tail unit with torque tube drive - this helicopter has it all.
The kit includes a high quality pre-painted canopy (and a second limited edition canopy is included if you pre-order now).
Not only that, but the kit includes (as standard) a Outrage Hyper Rage 50 pipe - perfectly matched to all 50 class engines.
With an ultra compact frame design and an all up weight of only 3.6kg, this model stands out in the 50 size field.
Head:
Fully adjustable head allowing multiple setups from high stability to maximum agility making it perfect for the beginner to advanced pilot.
CNC 7075-T651 American alloy on critical head support parts requiring ultra rigidity.
CNC 6061-T651 American alloy for head parts requiring stability.
Dual ball raced seesaw support in center hub.
Dual ball raced radius arms for precision control.
Extra long washout base for increased lever stability.
Dual ball raced 120/140 CCPM swash plate.
Achievable pitch range of +15/-15 degrees of pitch.
High quality screw hardware.
10mm Hollow hardened main shaft.
8mm Spindle shaft.
Stainless steel 4.75mm OD Linkage balls.
One piece dampers
Frame:
Ultra compact frame technology for superior frame rigidity.
CNC 6061-T651 American alloy main shaft bearing blocks and mechanics.
High quality fiber reinforced injection molded plastics.
High quality screw hardware.
Multiple Electronic placement options.
Adjustable servo mounts for various size and brand servos.
Ultra large clutch design to maximize engine output.
Self centering clutch hub.
Adjustable drive train for optional 8.8:1 gear ratio.
Designed with new larger displacement 50 class engines in mind.
Ultra high strength injection molded drive gears.
Zero pitch alignment points for easy head setup.
High CFM fan and shroud design for maximum cooling.
Optimal servo positions for increased accuracy in control.
Break-away canopy tabs.
Component positions mounted high in frame enhancing axial CG for improved 3D reactions.
Optional mounting position for in flight fuel needle trim servo.
High capacity fuel tank.
Tail System:
Extend boom length for improved forward flight tracking and superior tail authority in extreme 3D conditions.
16 Ball bearing tail pitch control system for smooth precise control.
Torque tube design for efficiency.
Ultra high strength Injection molded torque tube gears.
High quality carbon fiber 95mm tail blades.
Specifications:
Height:  378mmWidth 203mm
Main Rotor Blade Size 600-630mm
Main Rotor Diameter: 1355mm -1415mm
Tail Blade Length: 95mm
Tail Rotor Diameter: 250mm
Main Gear ratio: 8.6:1 (8.8:1 Optional)
Tail Rotor Ratio 4.583:1
Approximate Flying Weight with Fuel: 3.6kg /7.936 Lbs. (depending on equipment used)
The included stock canopy is also custom painted by CANOMOD
Note: main blades not included

Click here to see it fly
EQ-Vision 50 Helicopter Kit EQ-Vision 50
One of the cheapest 3D helicopters great for beginner !
VISION 50 ULTIMATE BIRTH
The project was born with the precise idea to realize an entry level helicopter.
The first project aimed to produce a machine with some key lines:

• Easy to assemble
• Easy to upkeep
• Easy to find spare parts
• Light

Fast and precise, much more than any other competition machine you can find on the market.
The industrial project and in particular Vision 50 Ultimate was born based on these guide-lines:
THINK DIFFERENT, MAKE DIFFERENT

We analyzed the different solutions offered on the market. So we realized that the technical solutions applied, even if trendy, had nothing to deal with the structural needs of a 3D helicopter.
The first idea was to have a 2 sides structure. It was immediately rejected because it did not satisfy the minimum requests of cross-rigidity.
In fact the helicopter needs this kind of rigidity, not a longitudinal one. This is much true in 3D flight.
Based on this Vision 50 Ultimate structure was born. Its superior frame creates a transversal structure.
The result is a fast and powerful machine.
Or pilots proved that it's the fastest collective on the market.

98030 : JR Vibe 90SG 3D Pro Heli Kit
Key Features
Fully tunable hi-cyclic head for extreme cyclic response
120/140 CCPM system
Driven tail with bearing supported aluminum shaft
Robust Sprag autorotation clutch
Push-pull cyclic linkage
High efficiency two-piece fan shroud
Flybar cage standard
Easily removed, vibration-isolated tank
Dual radial, single thrust tail blade grips
Dual yoke T/R actuator
Includes high-quality FRP fiberglass pre-painted canopy
All-new rotor head system with ultra-rigid dampening
Highly configurable rotor head settings
I-Beam high rigidity frame assembly
Oversized Main and Tail Drive transmissions
Self-Aligning, easy to maintain engine mount system

Specs
Type:90 size nitro 3D helicopter
Main Rotor Diameter:63 in (1600mm)
Tail Rotor Diameter:11.34 in (288mm)
Gross Weight:10.25 10.75 lb (4.65 4.88 kg)
Length:53.5 in (1359mm)
Main Gear Ratio:8:1
Tail Ratio:4.65:1
Engine Size:90 size class helicopter engine
Kit/ARF/RTF:Kit
Control System:120 or 140 CCPM
Rotor Blade Length:680-720mm

Click here to see it fly
JRH98012 : JR Vibe 90 3D Heli Kit
Key Features:
New Swash Design
New 1 piece CNC Rotor Hub
New Bevel Gear Hubs
New CNC Aluminium Tail Pitch lever
New Heavy Duty Tail Rotor Hub
New Heavy Duty Tail Case design
New 3D 3 Colour Pre-Painted canopy

Dimensions:
Length : 1,372mm
Blade Size: 700 - 720mm
Height : 437mm
Weight : 4.63 - 4.77kg
Gear Ratio : 8 : 1 : 4.83
Engine Size : 80 - 91

Click here to see it fly
JRH98021 : JR VIBE 50 3D HELI KIT
Key Features
Dual stage main gear
CNC machined aluminum head block
Push-pull control on all cyclic servos
Forward mount engine
120 or 140 CCPM control system
Pre-painted fiberglass canopy
Accepts 600-620mm blades
High tilt flybar
Governor mount and pre-drilled clutch for governor magnets
Break away body mounts
High efficiency two piece fan housing
Hi-cyclic head for extreme cyclic response
Driven tail with free-floating aluminum shaft
Robust clutch, drive train from Vibe 90
Easily removed, vibration-isolated tank
Weight adjustable flybar paddle design
Dual yoke T/R actuator
FRP canopy with decals