Baja Buggy 4WD Comp. Kit Hydr.Brake C-FG66000 €2499 (+ postage of €1) Click here to see it goThe Baja Buggy 4WD Competition is a complete new development by FG Modellsport. The model is equipped with a 4-wheel drive , which means: maximum drive power and therefore highest fun factor on every ground and in all curves.The open Baja bodyshell with doll driver, the metal roll cage as well as the gigantic rims with low-profile knobbed tires give the Baja Buggy an unmistakable striking looks. Equipped with a 26ccm engine the Baja is aggressive and a tremendous jumper.We deliver the models as a kit including mounting instruction. The bodies are made of clear polycarbonate for your own painting. Stickers such as writings are included.For the final assembly of the models you need further: radio control system (transmitter, receiver), 2 steering servos (each approx. 15 kg), 1 servo for throttle/rear brake (approx. 15 kg), 1 servo for front brake, batteries and charger.Angled 4mm alloy chassis, belt drive, casings to cover the belt, alloy differential gear at front and rear axle with hardened bevel gearwheels, alloy front axle housing, rear alloy axle mounts and alloy wishbones at front and rear axle, alloy ball joints, adjustable right/left thread rods at the track rods and at the front and rear wishbones, front alloy uprights, gearwheels made of case-hardened steel, rear FG ball drive, front FG ball drive with cardan joints, adjustable alloy servo saver, 4 large-volume oil-pressure shock absorbers, hydr. disk brake. Tuning disk brake at the front and rear wheels, 26ccm combustion engine, alloy engine mounts, 3-unit Tuning pipe, ready-for-use oiled OR air filter, rc plate, receiver box.According to side rails and the closed bodyshell the Baja Buggy is almost protected against dirt from underneath. Bodyshell and rear spoiler are made of polycarbonate. Driver's coverage and roll cage parts are made of aluminium. The giant low-profile knobbed tires are glued on white rims.The model is equipped with a powerful 26ccm combustion engine with ready-for-use oiled air filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties. Quantity: 12345678910 Buy Now: Street Hummer RTR (Black) w/26cc C-FG32030R €939 (+ postage of €1) The Street Hummer H2 has a modified front axle and different chassis adjustments. This model is delivered with the Slick tire equipment of the FG Race Trucks.All chassis parts are mounted on a 4mm angled alloy plate. All borings on the lower side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out through track rods with right-/left-handed thread, at the rear axle you can modify king pin angle and toe-in through adjusting screws. 8 oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle which can absorb also heavier bumps to a great extent and ensure an optimal road grip. All rotating parts are supported by ball bearings. Rear gearwheels, differential gears and all driving components are case-hardened. The alloy side plates protect the rc system as well as the tank. Monster and Stadium Hummer are delivered with chrome-plated rims, the Street version has rims in silver colour.The models are equipped with a powerful 26ccm combustion engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.    SpecificationLength:    660mmWidth:    500mmHeight:    340mm Quantity: 12345678910 Buy Now: Monster Jeep RTR (Red) w/26cc C-FG40020R €939 (+ postage of €1) The Monster Jeep with the massive wheels has a coloured and decaled bodyshell in red plus a further decal set with writings a.s.o. for additional decoration is enclosed.All chassis parts are mounted on a 4mm angled alloy plate. All borings on the lower side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out through track rods with right-/left-handed thread, at the rear axle you can modify king pin angle and toe-in through adjusting screws. 8 oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle which can absorb also heavier bumps to a great extent and ensure an optimal road grip. All rotating parts are supported by ball bearings. Rear gearwheels, differential gears and all driving components are case-hardened. The alloy side plates protect the rc system as well as the tank. Monster and Stadium Jeep are delivered with chrome-plated rims, the Street version has rims in silver colour.The models are equipped with a powerful 26ccm combustion engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties. Quantity: 12345678910 Buy Now: Street Truck RTR (White) w/26cc C-FG22000R €939 (+ postage of €1) All chassis parts are mounted on a 4mm angled alloy plate. All borings on the lower side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out through track rods with right-/left-handed thread, at the rear axle you can modify king pin angle and toe-in through adjusting screws. 8 oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle which can absorb also heavier bumps to a great extent and ensure an optimal road grip. All rotating parts are supported by ball bearings. Rear gearwheels, differential gears and all driving components are case-hardened. The alloy side plates protect the rc system as well as the tank. Monster and Stadium Truck are delivered with chrome-plated rims, the Street version has rims in silver colour.The models are equipped with a powerful 26ccm combustion engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.    SpecificationWheel Base:531mmWidth:    392mmLength:    880mmHeight:    245mm Quantity: 12345678910 Buy Now: F1 Sportsline 08 ARTR(Clear) w/26cc C-FG10000 €888 (+ postage of €1) Click here to see it goJust as Formula 1 is seen as the pinnacle of full-size car racing, FG's range of F1 racers must be seen as the ultimate of the FG Modellsport range. Closely modelled on the real machines, blink and you could almost believe they're full-size! No less than three versions of FG's terrific Formula 1 chassis are available. The first, with a Sportsline chassis, features a pre-built, high strength, countersunk 5mm alloy chassis with a double delta wishbone suspension configuration (with additional track rods at the rear) that allows quick and almost limitless set-up options to fine-tune the car's handling to match track conditions. A combination of left and right hand threaded rods mean that nothing needs to be dismantled to get the chassis handling exactly how you want it. Four high quality adjustable alloy oil filled shock absorbers ensure that the pushrod suspension is accurately controlled.All rotating parts are ballraced for minimum friction and maximum life. The transmission features a synchronous belt drive for power transfer. The chassis is supplied with an easy to operate and powerful 26cc petrol engine with pullstart and 4-shoe Teflon clutch, running through the include tuned pipe system. A streamlined air filter is also included. Front and rear spoilers are included but the body shell and decals must be purchased separately.The higher specification Competition Chassis is available in two kit versions - one with mechanical brakes and the other with a hydraulic brake system for the ultimate stopping power. Both competition chassis are based on an 8mm carbon and CNC-cut alloy countersunk chassis. With the front and rear suspension mounts linked with the engine, FG have managed to almost achieve the strength and stiffness of a monocoque chassis with these cars! Fully adjustable king pin and trailing angles mean the suspension can be quickly altered to suit every track condition. Four high quality oil filled adjustable alloy shock absorbers complete the suspension's double delta wishbone and track rod layout.Synchronous belt drive, an adjustable alloy differential, front and rear alloy uprights, alloy steering links, ball-type drive shafts with protective bellows, front and rear stabilisers, tuned pipe, streamlined air filter and ballraces throughout make up just some of the other race-winning features! Add to this a powerful (included) Zenoah 26cc pullstart petrol engine and you have all the power you could possibly want. A carbon fibre rear spoiler and impact resistant front spoiler are included but the body shell and decals must be purchased separately.Suitable radio is required to complete all three models. Futaba's 3GR system with S3305 and S3306 servos with suitable batteries are recommended.    SpecificationWheel Base:    620mmWidth:    440mmLength:    960mmHeight:    230mm Quantity: 12345678910 Buy Now: Baja Buggy RTR (Red) w/26cc C-FG60020R €819 (+ postage of €1) The open bodyshell with the metal roll cage as well as the gigantic rims with low-profile knobbed tires give the Baja Buggy its unmistakable striking looks. The model is based on the 1:6 Marder chassis from which most of the chassis parts have been applied. Of course driving fun has top priority just the same as with all our 1:6 Off-Road models.The Baja Buggy is built on a 4mm angled alloy chassis. All borings on the lower side are countersunk in order to prevent the screw heads from sticking out. Double wishbones at front and rear axle as well as 4 oil-pressure shock absorbers guarantee an optimal road grip. All rotating parts are supported by ball bearings. Rear gearwheels, differential gears and all driving components are case-hardened. According to side rails the underneath of the model is almost closed and therefore the chassis parts are protected against dirt.The model is equipped with a powerful 26ccm combustion engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.    SpecificationWheel Base:    475mmWidth:    475mmLength:    690mmHeight:    290mm Quantity: 12345678910 Buy Now: Baja Buggy ARR (Clear) w/26cc C-FG60050 €615 (+ postage of €1) The open bodyshell with the metal roll cage as well as the gigantic rims with low-profile knobbed tires give the Baja Buggy its unmistakable striking looks. The model is based on the 1:6 Marder chassis from which most of the chassis parts have been applied. Of course driving fun has top priority just the same as with all our 1:6 Off-Road models.The Baja Buggy is built on a 4mm angled alloy chassis. All borings on the lower side are countersunk in order to prevent the screw heads from sticking out. Double wishbones at front and rear axle as well as 4 oil-pressure shock absorbers guarantee an optimal road grip. All rotating parts are supported by ball bearings. Rear gearwheels, differential gears and all driving components are case-hardened. According to side rails the underneath of the model is almost closed and therefore the chassis parts are protected against dirt.The model is equipped with a powerful 26ccm combustion engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.    SpecificationWheel Base:475mmWidth:    475mmLength:    690mHeight:    290mm Quantity: 12345678910 Buy Now: CEN Genesis (RTR) - 4WD GP C-CEN9501 €459 (+ postage of €1) Click here to see it goIntroducing the biggest, meanest monster truck in the R/C world. Built to out climb, out power, and drive over all the opposition. The Genesis comes standard with a high performance racing engine connected to an adjustable 3-speed transmission for brutal bottom end torque while still maintaining good top end speed. The Genesis' unique suspension set-up adds extra dampening to smooth out the toughest terrain and still keep itself on its wheels during high speed cornering. Designed for the hardcore monster truck fanatic! With over 4" of ground clearance and a top speed of approx 50-55mph this is one Mean Monster.    SpecificationRadio System:    2 Ch IncludedWheel Drive:    4WDIC Motor:    .46 ABC IncludedLength:    609.6mm (24") Quantity: 12345678910 Buy Now: CEN Genesis GST7.7 (RTR) 4WD GP C-CEN9508 €349 (+ postage of €1) Click here to see it goWas 689 euro now only 349 euro while stocks last!CEN Genesis GST7.7 (RTR) 4WD GP C-CEN9508The original Genesis raised the bar in terms of what a monster truck could be and how it could perform. Now the GST 7.7 takes all of that knowledge and adds even stronger chassis components of aircraft grade aluminium and steel, plus the more powerful NX 7.7 pullstart engine with improved carburettor, for unrivalled torque and power.GST7.7 Features:Supplied factory assembledDual Vertical Plate Chassis (VPC)Pre-painted and decaled body shellSanwa-produced MX-3 Sport computer radioHardened steel 8mm heavy-duty CVS drive shaftsNX7.7 pullstart engine develops an incredible 5 horsepower!Aluminium tuned pipe3-Speed Forward/Reverse Transmission - 40mph in either direction!3 x bevel gear differentialsHigh torque (10Kg), metal-geared steering and throttle servos220cc flip top fuel tank means more run time and less refills!4 x vented metal brake disc system for ultimate stopping power and no fade, independently adjustable front and rear8 x oil filled shocks with functional reservoirs and stiff race springs give added stability on rough terrainSealed radio box protects onboard R/C equipment from dust, dirt, water and oilHeavy-duty shock towers and adjustable turnbucklesHigh impact bumpers, front and rearSkid plate bumpers front and rear protect chassis components190mm diameter low profile V-tread tyres on chromed plastic 5 split-spoke wheels23mm drive hexes give increased durabilityAllen head screws used throughoutFully ballracedStart-up pack including glowstart/charger, 500cc fuel bottle, 6-way wrench and 23mm wheel wrenchLength: 587mmWidth: 467mmWheelbase: 397mmGround Clearance: 102mmWeight: 7.3Kg (approx.)    SpecificationIC Motor:    7.7ccWheel Base:    397mmGround Clearance:    112mmWidth:    467mmLength:    587mm Quantity: 12345678910 Buy Now: CTR5.0 Subaru Impreza 4WD GP C-CEN9424 €309 (+ postage of €8) CTR5.0 Subaru Impreza 4WD GP    C-CEN9424    CEN Racing's Limited Edition CTR 5.0 RTR is the car to beat. Based on a modified version of the proven CT5 chassis, but with the Corsa 5.0 (5cc) pullstart engine fitted as standard - that's the powerplant from the 1:8 GSR 5.0! A tuned pipe matched to the engine ensures maximum power output! Other enhancements include a carbon fibre upper deck, rear brace and front/rear shock towers! The easy to tune automatic 2 speed transmission will rocket the CTR 5.0 up to speeds in excess of 90mph, out of the box! Specification is high on this car and… it's only available for a limited period!3mm Hard anodised aluminum chassisAdjustable lightweight 2 speed transmissionCarbon fibre upper deck, brace and shock towersAluminium threaded oil filled shocksFront and rear ball differentialsUltra lightweight hinge pinsHard anodised aluminium pivot ballsCVS (constant velocity shafts) on all four wheelsFront and rear stabiliser barsFront and rear belt tensionersRacing style 75cc fuel tank w/filterAdjustable chassis droopHigh impact foam bumperVented metal brake disc for smooth braking actionAdjustable turnbucklesLightweight race wheelsSuper soft 'V' tread tyresFully ballracedIncludes Skyion DX-Pro FM Digital Radio.10 model memoryLCD displayExponentialDual ratesEnd point adjustment    SpecificationWeight:    1900gWheel Base:    260mmGround Clearance:    8mmTyres:    26mmWidth:    196mmComes in 4 different shells, choose in options box(Subaru-Mercedes CLK-DTM-BMW 320i-ETCC-BMW 320i-ETCC-Porsche 911 Quantity: 12345678910 Options: Please select ...Subaru ImprezaMercedes CLK-DTMBMW 320i-ETCCPorsche 911 Buy Now: CEN CT5 Subaru Impreza 4WD GP RTR C-CEN9414 €275 (+ postage of €8) Click here to see it goOfficially rated the 'World's Fastest RTR' at an astonishing 73.4mph, CEN's CT5 series Subaru Impreza on road racer is seriously quick and highly specified, supplied standard with many parts that would be considered option parts by other manufacturers! All of this goes to make a highly tuneable chassis that'll be the envy of all racers. Release your inner speed freak with the CT5!CT5 Features:Supplied factory assembled3mm anodised fully countersunk chassisFactory painted and decaled polycarbonate body shellSanwa-produced MX-3 Sport computer radioCombination shaft and belt drive, constant 4WDNX15 pullstart engine with twin-needle slide carburettorComposite tuned pipeAdjustable 2-Speed Transmission2 x Bevel-gear differentialsLaydown steering servo lowers C of G and increases stability75cc flip-top fuel tankPivot-ball suspension system allows for easy setup changesComposite brake discIndependent adjustable oil filled shocksRear sway bar helps reduce chassis rollAdjustable rear toe-inAluminium upper deckBallracedHigh impact foam front bumperTransponder mountAdditional belts/pulleys for 'Street Race' (73.4mph) optionLength: 360mmWidth: 196mmWheelbase: 260mmGround Clearance: 8mmWeight: 1.9Kg (approx.)Comes in 3 different shells, choose in options box(Subaru-Porsche 911-Ford GT) Quantity: 12345678910 Options: Please select ...Subaru ImprezaPorsche 911Ford GT Buy Now: GSR 5.0 (RTR) 4WD GP C-CEN9511 €289 (+ postage of €8) Click here to see it goWas 575 euro now only 289 euro while stocks last!GSR 5.0 (RTR) 4WD GP    C-CEN9511Perfect for the national racer or just for extreme bashing, the CEN GSR 5.0 is here! Based on CEN's proven Genesis/GST 7.7 chassis, the GSR 5.0 is a stripped down out-and-out racer that can reach speeds of 45mph, out of the box!GSR 5.0 Features:Supplied factory assembledDual Vertical Plate Chassis (VPC)Pre-painted and decaled body shellSanwa-produced MX-3 Sport computer radioHeavy-duty telescoping drive shaftsCorsa 30 pullstart engineComposite tuned pipe2-Speed adjustable transmission2 x steel bevel gear differentialsAluminium diff casesHigh torque (10Kg), metal-geared steering and throttle servos220cc flip top fuel tank means more run time and less refills!4 x vented metal brake disc system for ultimate stopping power and no fade, independently adjustable front and rear4 x oil filled shocks with functional reservoirs and stiff race springs give added stability on rough terrainSealed radio box protects onboard R/C equipment from dust, dirt, water and oilHeavy-duty shock towers and adjustable turnbucklesHigh impact bumpers, front and rearSkid plate bumpers front and rear protect chassis componentsLightweight 6-spoke wheels and all-terrain, soft compound tyres for maximum gripHigh downforce rear wing is adjustable - gives more control in the air!1-piece engine mount features machined cooling fins23mm drive hexes give increased durabilityAllen head screws used on most fixingsFully ballraced23mm wheel wrench includedLength: 570mmWidth: 420mmHeight: 250mmWheelbase: 397mmGround Clearance: 80mmWeight: 5.7Kg (approx.) Quantity: 12345678910 Buy Now: X-Terminator 2 Buggy 1:8 4WD RTR C-XTM-XT2 €269 (+ postage of €8) Click here to see it goIf you're looking for a high specification racing buggy that's supplied to you in a Ready-to-Run format, completely built and printed from the factory, with radio control included, installed and factory tested, and a big block 24.7 size pullstart engine, look no further than the X-Terminator 2 from XTM Racing.With standard features often only included on competition grade kits, the XT2 puts the high in high-spec!Powerful XTM 24.7 Big Block engine!Pull-start engine included!Awesome 2.6 horsepower!Ringless piston/liner.Easy adjust carburettor.CNC manufactured for exacting quality and consistent performance.X-Terminator 2 Features:Supplied pre-built from the factoryFactory fitted and tested radio controlXTM 247 ballraced pullstart engine with twin needle, slide carburettorRacing tuned pipe125cc Flip top fuel tank3mm Countersunk aluminium chassis3 x Steel bevel geared differentialsSteel main gearVentilated double brake discsIndependent double-wishbone suspensionIndependent oil filled sprung shock absorbers4mm Front shock tower with 6 shock mount positions4mm Rear shock tower with 9 shock mount positionsSuper-strong 5mm chassis braces, front and rearAdjustable links throughoutSeparate dust-proof receiver and battery boxesAdjustable servo saverCVD front drive shaftsRear stabiliser barPre-printed polycarbonate body shellDie-cut decal sheetDouble-deck nylon rear wingDish pattern wheels with high grip tyresBallraced throughout    SpecificationTop RPM:28,000Tyres:    156mmWidth:    432mmLength:    597mmHeight:    216mmWeight:    4650gDisplacement:    0.247cu.in. 4.02ccPower Output:    2.6 bhp Quantity: 12345678910 Buy Now: NX Rally Subaru Impreza (RTR)4WD GP C-CEN9255 €259 (+ postage of €8) Click here to see it goNX Rally Subaru Impreza (RTR)4WD GP    C-CEN9255Developed from the popular NX Talon Buggy and Magnum Monster Truck, CEN's NX Rally Impreza takes all their best features and adds a detailed body in tough, pre-painted and decaled polycarbonate plastic, plus rally wheels and tyres for ultimate scale looks! Feature-packed and ready to rumble, this car offers fun-filled action wherever you choose to drive it! And with its included NX18 pullstart engine, composite tuned pipe and 2-speed transmission, you can reach speeds of 45mph, out of the box!NX Rally Features:Supplied factory assembled2.5mm anodised countersunk chassis with front and side kick-up for added strengthFactory painted and decaled polycarbonate body shellSanwa-produced MX-3 Sport computer radioAll shaft, constant 4WDNX18 pullstart engine with twin-needle carburettorComposite tuned pipeAdjustable 2-Speed Transmission2 x Bevel-gear differentialsLaydown steering servo lowers C of G and increases stability125cc flip-top fuel tank for long run times between refillsPivot-ball suspension system allows for easy setup changesConstant velocity drive shaftsHardened ring and pinion gearsComposite brake disc (4 wheel braking)Independent oil filled shocks (adjustable)Adjustable rear toe-in with heavy-duty linksDust-proof radio/battery box protects onboard R/C from track debrisUpper deck braces entire length of chassis to reduce flexBallracedLength: 414mmWidth: 326mmWheelbase: 295mmGround Clearance: 45mmWeight: 2.5Kg (approx.)Comes in 2 different shells, choose in options box(Subaru-New Mini) Quantity: 12345678910 Options: Please select ...Subaru ImprezaNew Mini Buy Now: CEN MG10 Stadium Truck (RTR)-4WD GP C-CEN8561 €209 (+ postage of €8) Click here to see it goCEN MG10 Stadium Truck (RTR)-4WD GP    C-CEN8561Value for money and fun is what the MG10 is all about. But at Cen that means you still get 4WD, a ballraced .15 size engine with slide carburettor and tuned pipe for blistering performance. The chassis is moulded in glass reinforced nylon to provide the ideal combination of lower suspension at either end combined with a big centre body clearance to clamber over the roughest terrain. That chassis also protects the steel centre drive shaft and provides the mounting for all the included R/C equipment.Those R/C boxes provide protection against the elements as well as resistance to impact damage for the receiver and battery alike. With a wide track and 'grippy' tyres the MG10 TR has amazing handling to really take advantage of that engine performance. With the computerised Skyion DSX transmitter in your hands it's all down to you!Factory built with pre-painted and decaled bodyHigh quality Skyion DSX computer radio system includedPowerful, factory fitted ballraced .15 class engineLarge volume tuned pipe for maximum performance    SpecificationTyres:    103mmWheel Base:    282mmWidth:    322mm Quantity: 12345678910 Buy Now: CEN Magnum NX MT 1:10 4WD GP RTR C-CEN9250R €219 (+ postage of €8) Click here to see it goCEN Magnum NX MT 1:10 4WD GP RTR      C-CEN9250R  Powerful NX 3.0 (.18cu.in), ballraced, ABC engine with strong torque Optimised, composite tuned pipe for high power and impact resistance Adjustable 2-speed transmission Centre drive shaft for improved efficiency Large 125cc fuel tank with integral 'stone' filter 2.5mm one piece chassis with front 'kick up' Constant Velocity (CVS) front drive shafts Metal Geared differentials Metal, oil-filled shock absorbers front and rear 3.0mm Aluminium shock towers Top chassis support as standard Pivot ball suspension Quantity: 12345678910 Buy Now: Nitro X-Cellerator 1:10 w/XTM18 RTR C-XTM-NXC €185 (+ postage of €8) Click here to see it goClocked at an amazing 46mph by US Magazine R/C Car Action, the X-Cellerator GP offers truly stunning performance and handling. Coming pre-assembled, the X-Cellerator GP gets you on the track quickly with racing truck performance. Crammed full of performance enhancing features and topped with an awesomely powerful rear exhaust XTM-18 engine, it's not surprising that this truck will out-perform most cars in its class straight from the box. Supplied complete with a factory painted and trimmed body.Adjustable slipper clutchThick aluminium chassis with countersunk fastenersFibreglass brake diskFactory painted bodyCVA-Type drive axlesDust proof receiver boxUltra low centre of gravityMultiple shock position with threaded shocksCompletely countersunk, moulded chassisAdjustable camber, wheelbase and shock positionFactory painted and trimmed bodyAdjustable servo saver assemblyRace inspired suspension    SpecificationWheel Drive:2WDIC Motor:.18 Quantity: 12345678910 Buy Now: MG10-MT3 Monster Truck 4WD GP RTR C-CEN8563 €179 (+ postage of €8) Was 230 euro and now only 179 euro while stocks last!MG10-MT3 Monster Truck 4WD GP RTR    C-CEN8563The MG10 MT3 is the upgraded version of the original 'MT' and features CEN's proven 'HIC' (High Impact Composite) chassis design which is both flexible and tough, perfect for typical off-road running! Now fitted with higher grip, new pattern tyres and a powerful Corsa 18S pullstart engine with twin-needle slide carburettor, plus the latest Skyion DX Pro feature-packed computer radio, there's never been a better time to own an MG10!Features:Supplied factory assembledHIC (High Impact Composite) chassis is flexible, yet toughFactory painted and decaled polycarbonate body shellSkyion 3Ch DX-Pro computer radio*All shaft, constant 4WDCorsa 18S pullstart engine with twin-needle carburettorComposite tuned pipeAdjustable Slipper ClutchComposite Brake Disc2 x Bevel-gear differentialsLaydown steering servo lowers C of G and increases stability75cc flip-top fuel tankPivot-ball suspension system allows for easy setup changesWide track suspension arms for added stabilityIndependent, long-reach oil filled shocks (adjustable)Dust-proof radio/battery box protects onboard R/C from track debrisBallracedRadio Features:LCD Display10 Model MemoryDigital TrimsServo ReversersSteering Dual RatesEPA (End Point Adjustment)ATL (for Braking)Assignable Digital Trim SwitchesABS (Anti-Lock Braking)Required for operation (Not Included):12 x AA batteries, glowstart, fuel    SpecificationLength:    378mmHeight:    190mmWeight:    tbaWheel Base:    282mmGround Clearance:    35mmWidth:    322m Quantity: 12345678910 Buy Now: MG10-TR2 Stadium Truck 4WD GP RTR C-CEN8564 €179 (+ postage of €8) Was 230 euro and now only 179 euro while stocks last!MG10-TR2 Stadium Truck 4WD GP RTR    C-CEN8564    The MG10 TR2 is the upgraded version of the original MG10 Stadium Truck and features CEN's proven 'HIC' (High Impact Composite) chassis design which is both flexible and tough, perfect for typical off-road running! Now fitted with higher grip, new pattern tyres and a powerful Corsa 18S pullstart engine with twin-needle slide carburettor, plus the latest Skyion DX Pro feature-packed computer radio, there's never been a better time to own an MG10!Features:Supplied factory assembledHIC (High Impact Composite) chassis is flexible, yet toughFactory painted and decaled polycarbonate body shellSkyion 3Ch DX-Pro computer radio*All shaft, constant 4WDCorsa 18S pullstart engine with twin-needle carburettorComposite tuned pipeAdjustable Slipper ClutchComposite Brake Disc2 x Bevel-gear differentialsLaydown steering servo lowers C of G and increases stability75cc flip-top fuel tankPivot-ball suspension system allows for easy setup changesWide track suspension arms for added stabilityIndependent, long-reach oil filled shocks (adjustable)Dust-proof radio/battery box protects onboard R/C from track debrisBallracedFeatures: LCD Display, 10 Model Memory, Digital Trims, Servo Reversers, Steering Dual Rates, EPA (End Point Adjustment), ATL (for Braking), Assignable Digital Trim Switches, ABS (Anti-Lock Braking)Required for operation (Not Included):12 x AA batteries, glowstart, fuel    SpecificationLength:    378mmHeight:    168mmWeight:    tbaWheel Base:    282mmGround Clearance:    35mmWidth:    322mm Quantity: 12345678910 Buy Now: MG16-MT Mini Monster 4WD GP RTR C-CEN8551 €165 (+ postage of €8) Was 199 euro and now only 165 euro while stocks last!MG16-MT Mini Monster 4WD GP RTR    C-CEN8551Not everybody has the space to run a car like the awesome Genesis so CEN have introduced the MG16. No puny .07 class engines here, the MG16 has a 'snorting' .15, ballraced engine to really get the blood pumping!! That power is harnessed through a tough 4WD system with metal bevel gear differentials front and rear. The centre drive is transmitted via a steel drive shaft that is cleverly protected in the centre of the chassis and that composite chassis is heavily reinforced to prevent flex and lost drive. With oil shocks front and rear and strong suspension arms there's handling to go with that power. The whole package is topped off with the Skyion DSX computerR/C system to help you enjoy the MG16 driving experience.    SpecificationTyres:    103mmWheel Base:    190mmWidth:    265mm Quantity: 12345678910 Buy Now: CEN MG10 Monster Truck (RTR)-4WD GP C-CEN8562 €209 (+ postage of €8) Click here to see it goCEN MG10 Monster Truck (RTR)-4WD GP C-CEN8562Sharing the same basic chassis as the TR version, the MG10 monster truck has the advantage of improved ground clearance, thanks to those big tyres & wheels and can cope with a wide variety of terrains as a result. Whether you are boulder climbing or hacking across your local grass field the MG10 Monster Truck just laps it up. Accidental stripping of the main plastic drive gear is limited by the effective slipper clutch that prevents transmission shocks over stressing the gear teeth. The 75cc fuel tank delivers around 10 mins of fun per fill and can be re-filled in seconds.Well, you wouldn't want the fun to stop, would you?    SpecificationTyres:    103mmWheel Base:    282mmWidth:    322mm Quantity: 12345678910 Buy Now: CEN Talon NX Buggy 1:10 4WD GP RTR C-CEN9252R €209 (+ postage of €8) Click here to see it goCEN Talon NX Buggy 1:10 4WD GP RTR C-CEN9252RPowerful NX 3.0 (.18cu.in), ballraced, ABC engine with strong torqueOptimised, composite tuned pipe for high power and impact resistanceAdjustable 2-speed transmissionCentre drive shaft for improved efficiencyLarge 125cc fuel tank with integral 'stone' filter2.5mm one piece chassis with front 'kick up'Constant Velocity (CVS) front drive shaftsMetal Geared differentialsMetal, oil-filled shock absorbers front and rear3.0mm Aluminium shock towersTop chassis support as standardPivot ball suspension Quantity: 12345678910 Buy Now: XT2 Racer-Track Edition RTR w/OS21 C-XTM-XT2TE €310 (+ postage of €8) Click here to see it goXT2 Racer-Track Edition RTR w/OS21 C-XTM-XT2TEThe standard XT2 Buggy has proven to be an extremely popular rally cross racer for those looking for a larger fun machine to take over the park and local playing fields. With its steel drive train, constant shaft driven 4WD, heavily braced countersunk chassis, independent oil filled shocks and XTM247 engine, the XT2 Buggy is built to bash and hard to beat, especially as it's supplied in a ready-to-run format from the factory!However, from requests received we've realised that some demand a car they can take to their local club to race too. With this in mind, we've modified the XT2 Buggy and created the new XT2 Racer - Track Edition. This is an enhanced version of the XT2 RTR with the addition of a new race-legal O.S. MAX pullstart engine, beefed up shock absorbers, 7075 hardened aluminium suspension holders and Proline Crime Fighter™ tyres.To mark the change we've even run a revised colour scheme for the body shell, the wheels and the 17mm drive hexes and washers to make a buggy that's as eye-catching as it is high performing! And, it's supplied ready-to-run from the factory, so you can be at the club and racing as soon as you want!O.S. MAX 21VG-PX pullstart engineAdjustable alloy oil shocks with 3.5mm shock shaftsHardened aluminium suspension holders, front and rearProline Crime Fighter™ tyres for added traction3CFM pistol-grip FM computer radio with 10 model memoriesSpecificationLength:    483mm    Height:    152mmWeight:    3.63KgWidth:    305mmDisplacement:    0.211cu.in (3.46cc)Bore:    16.6mmStroke:    16mmPower Output:    2.0PS @ 30,000 RPM     Quantity: 12345678910 Buy Now: XST 1:8 4WD w/XTM247 RTR C-XTM-XST €310 (+ postage of €8) XST 1:8 4WD w/XTM247 RTR C-XTM-XSTFACTORY ASSEMBLED 1:8 4WD HIGH PERFORMANCE NITRO TRUGGY - 40+MPH/65+KPHThe XST 4WD Truggy RTR is a purpose built truck designed to handle any terrain it encounters. With 4mm thick aluminium shock towers, threaded aluminium oil filled shocks with 3.5mm diameter shock shafts, chrome plated front universals and a 3mm thick aluminium chassis. The XST 4WD Truggy RTR is ready for backyard bashing or the next trip to your local track. Rest assured that the XST will perform with tough 5mm aluminium braces that support the front and rear gearboxes, a mega high torque metal-geared steering servo and steel drivetrain. With its stock wheelbase and steering geometry, the XST 4WD Truggy RTR will make it through thetightest turns of the track with ease!The XTM 24.7 engine - with aluminium tuned pipe - is the heart of this 4WD truggy.FEATURES:Ready to Run! Radio Included!Printed and trimmed racing style body4mm aluminium shock towers with multiple shock mounting positionsOff road tyres mounted on dish wheels accept numerous after market tyresBi-level wing for added rear downforceFront universals and rear dog bonesAluminium bracing front and rearRear sway bar for aggressive handling4 wheel drive, 3 differential drivetrain with full bearing support    SpecificationLength:    553mmHeight:    165mmWeight:    4.13KgWheel Base:    349~355mmWidth:    419 (Fr), 425 (Rr)Power Output:    2.6 BHP Quantity: 12345678910 Buy Now: XLB Buggy 1:7 4WD w/.28 & 2Speed C-XTM-XLB €309 (+ postage of €8) Click here to see it goXLB Buggy 1:7 4WD w/.28 & 2Speed C-XTM-XLBMassive 1:7th scaleThis RTR monster buggy is pushing all other buggies out of its way, so make some room!Introducing the XLB (XTM's Large Buggy)... It's the biggest and baddest monster buggy out there! They didn't follow any rules when building this beast!This massive 1/7 scale buggy uses the monstrous, 3.5hp output SH .28 engine and with its oversized fuel tank,2-speed transmission and 4WD drivetrain, this monster buggy is ready to drive over all other buggies out there!Features:High quality two channel R/CSH .28 Engine with large, 2-chamber tuned pipe2-Speed transmissionFactory painted and trimmed bodyXTM X-175 metal gear servo for steeringXTM X-77 metal gear servo for throttleNew XTM Micro Failsafe includedPowerful XTMSH .28 Big Block engine included!Displacement: 0.247cu.in. 4.02ccMax Rpm: 28,000Power: 2.6bhpWeight: 13.23oz 375gDouble bracing front and rearDust-proof battery and receiver boxTriple vented disc brakesFully ball racedAdjustable camber, caster and toe-in front and rear4mm thick shock towers3.5 Bhp engineMassive 2 chamber tuned pipeFully threaded aluminium body shocks with 3.5mm shafts2 Speed TransmissionHuge rear wing for extra downforceSpecificationIC Motor:    .28Wheel Drive:    4WD Quantity: 12345678910 Buy Now: CEN Matrix TR Arena(RTR) 4WD GP C-CEN9561 €315 (+ postage of €8) Click here to see it goCEN Matrix TR Arena(RTR) 4WD GP    C-CEN9561Designed for performance but with ease of maintenance also a priority, the new Matrix truggy is more than capable of looking after itself on the track! A powerful .28 class engine, tough chassis, low centre of gravity and fully adjustable suspension geometry make the new TR Arena a serious competitor.Powerful .28 class ABC engine3 x Gear differentials4 Disc metal brakesSteel spur gear23mm Wheel HexesTwo channel computer radioFactory built and ready to run    SpecificationLength:    560mmWheel Base:    370-375mmWidth:    415mm Quantity: 12345678910 Buy Now: