Nitro Accessories
^isaprocart^
(+ postage of €2)

Fuel Line Clips, Medium

Quantity:
Buy Now:
(+ postage of €2)

  • Designed for medium (3/32'') fuel line.
  • Ideal for plugging fuel lines while traveling.
  • Seals without damaging tubing
  • This is a set of Great Planes Aluminum Fuel Line Plugs.
  • These are also known as fuel dots.
  • FEATURES: Aluminum fuel plugs for medium fuel tubing.
    Plugs up fuel lines when transporting your model or to seal off a fuel tank filling tube while flying.

Quantity:
Buy Now:
(+ postage of €2)

This is a Bundle of 2 Feet of Silicone Fuel Tubing.
This product can be used for pressure lines and nitro fuel lines.

  • FEATURES:Purple in colorStandard diameter
  • INCLUDES: One 2-foot section of fuel tubing
  • REQUIRES: Cutting to required length.
  • SPECS: Length: 2 feet (609mm)This product can be used for any application requiring silicone fuel tubing

Quantity:
Buy Now:
(+ postage of €2)

This is the exhaust deflector for engines from 0.5 to 0.9  Made from silicon material with end cap.
Qty: 2pcs Color: Black

Quantity:
Buy Now:
(+ postage of €3)

Quantity:
Buy Now:
(+ postage of €2)

This is an In-Line Fuel Filter for nitro applications from Dubro.

This part connects in between the fuel tank and carburetor.

FEATURES:

  • Natural aluminum color
  • Filter body seperates to remove and clean filtering mesh
  • INCLUDES:One assembled fuel filter
  • REQUIRES: Installing with standard fuel tubing attached to each end
  • Length: 29mm 1.15"
  • Outer diameter: 10.5mm (0.41")
  • The length of the filter is measured from tip to tip, not the main body of the filter.

Quantity:
Buy Now:
(+ postage of €3)

Standard size starter rubber. Suits most electric starters.

Quantity:
Buy Now:
(+ postage of €2)

Dubro Fuel Can Fittings help to provide quick and easy fuel pump hook-ups.
These universal cap fittings and nylon filter will fit and 1-1/4" or larger
fuel can cap. The 8-piece set includes(4)1/4" nuts, 3 top quality brass
fittings and a fuel filter. These fittings requires large size fuel tubing.
Does not include the fuel cap. You must drill holes in the cap that came on
your fuel can. Requires drilling only 2 holes....very simple!

Quantity:
Buy Now:
(+ postage of €2)

This Device is used with your Fuel Can with Pump System.

It has Twin Filters to Help Remove Any Particles that May Damage An Engine.

All Components for Converting the Can Are Included.

FEATURES: Simple Conversion to Allow for "lid on" Operation of fuel pumps with

Fuel Containers.

INCLUDES: One Filtered Fuel Pickup (GPMP4156)

One Inlet Fitting w/Nut
One Return Fitting w/Nut
One Filtered Fuel Probe (GPMP4157)

COMMENTS: Use only glow fuel with this device. Will require drilling fuel can

lid 1/4" for installing the fittings. Will also require some medium fuel tubing.

Quantity:
Buy Now:
(+ postage of €3)

This is Hobbico's Recoil Fuel Tubing that is 5 foot in extended length.

FEATURES: Stretches to 5', yet shrinks to just 10" in length
Tough vinyl construction resists nicks or cuts and stays flexible
Can be used with Gas or Glow Fuel
Easy to attach and low-clutter storage

INCLUDES: One Recoil Fuel Tubing 5' long

Quantity:
Buy Now:
(+ postage of €2)

This is a set of two orange K&S Fuel Shut Off clamps. The worlds best designed, best selling fuel shutoff clamps, these mechanical clamps are great! They hold the fuel line closed firmly when shut, and can be released with the press of a button! Great for any glow heli.

Quantity:
Buy Now:
(+ postage of €3)

  • Plastic 2 oz (60cc) header gas tank and cnc aluminum holder for all nitro helis.
  • Color: SILVER aluminum holder
  • Quantity: 1pcs

Quantity:
Options:
Buy Now:
(+ postage of €5)

This is the Slimline Pro Cap for one gallon glow fuel cans.

FEATURES: F1 and Excel fill nozzle compatible
Creates a closed loop fuel system for safely drawing and venting glow fuel

Threads easily onto 1 gallon glow fuel can

Constructed of billet machined aluminum, black in color

Works with electric and manual fuel pump

INCLUDES: Cap with F1 fill nozzle, three rubber O-rings, two 10/32 fittings worth washers, black glow O-ring and nozzle

REQUIRES: Installing nozzle and threading onto fuel can

SPECS:      Cap
Height: 1.1" (27mm)
Diameter: 1.4" (35mm)

COMMENTS: For glow fuel only, do not use with gasoline

 

Quantity:
Buy Now:
(+ postage of €2)

An in-line one-way valve which goes between the tank and carburettor to stop fuel running back into the tank. Engine restarts are therefore improved as fuel is retained in the fuel line and available to the carburettor at all times.

Kavan One Way Valve L-FK277C

Quantity:
Buy Now:
(+ postage of €2)

Instead of using a screw or bolt to blank off a fuel vent tube, try our beautifully machined versions with optional mounting ring which locates in the cowl or fuselage side. With a knurled head for easy removal, these make a practical and far more attractive alternative.

Stop Plug w/Mount Ring (Pk2) L-MG267

Quantity:
Buy Now:
(+ postage of €6)

A high quality fully sealed and reversible 12 volt fuel pump featuring tough, straight cut pumping gears and silicone 'O' ring seals. The durable external case has moulded on mounting points for easy installation in your flight box.This pump should only be used with glow fuels. For maximum service life, the pump should always be mounted with the fuel tube connectors at the bottom.
Irvine 12 Volt Fuel Pump L-IE63

Quantity:
Buy Now:
(+ postage of €2)

Quantity:
Buy Now:
(+ postage of €10)

Ergonomically designed for optimal hand grip to prevent slippage, light
weight, and easy to assemble/disassemble for transport ease. Suitable
for fixed wing airplanes or helicopters, engine can be started with a
simple one hand press on the button.
Suitable for up to 50cc gasoline engine or 300 class nitro engine.
Designed for user replaceable, common 450 heli sized
3S1P 1900~2300mAh/16c lipo batteries. Fully charged battery is
capable of 500 starts and beyond. Battery packs are charged with any
T-REX 450 battery chargers.
Starting adaptor includes double one way bearing design.
High efficiency motor providing high starting power, and low reacting
force.
LED battery voltage indicator and over-discharge protection circuitry.
Battery undervoltage protection.
Overheating protection
Protection against stalling by flooded torque overloading engine.
Specification:
Suitable battery:Li-Po 3S1P 11.1V 1900~2300mAh 16C and above(maximum size 112x35x24mm)
No load rotation speed:2300rpm
Battery undervoltage:10.8V
Quiescent current:0 mA
Motor overheat protection:80°C
Decelerate gear ratio:5.3:1
Size:80x60x390mm
Weight:700g (w/o battery)
Accessories:
Starter body x 1
Helicopter Starter Shaft x 1
Option: Battery:3S1P 11.1V 1900~2300mAh 16C and above Li-Poly battery

Quantity:
Buy Now:
(+ postage of €2)

Slightly cooler than the #8, and ideal for the constant on/off throttle action in 1/10 and 1/8 scale racing Glowplug No 10 (A5)Cool L-OS71605100

Quantity:
Buy Now:
(+ postage of €5)

OMI Fuel Magnet - Designed by engine James O'neil
This simple little device soaks up every last drop of fuel from your tank.
It's especially good at giving consistent running throughout the tank as the foam sucks up the fuel always giving a constant supply to the engine.
Pretty much a must have item if you are flying 90s with a Cline!

Quantity:
Buy Now:
(+ postage of €6)

HFSSTQ04 Spinner Cup (For Airplane)
Fits Align starter to allow you to start planes too.
Accessories:
Airplane Spinner Cup x 1
Starter Rubber x 1
Starter shaft O-Ring x 1

Quantity:
Buy Now:
(+ postage of €3)

3/32"(2.3mm) Fl.Grn/Yel/Ora 3x750mm    L-ST200   
Ripmax Silicone Tube is tough, extra flexible and heat resistant. This material has great resistance to kinking and it will not harden with age. We have now introduced a pack containing three colours of fluorescent fuel tubing , supplied in 0.75 metre lengths, that will add a splash of colour to any car, boat or aircraft engine bay.

Quantity:
Buy Now:
(+ postage of €6)

Thin Wall Clunk Tube (1m)    L-ITS092
Thin wall fuel tubing designed specifically for connecting clunks inside fuel tanks. 2.3mm bore x 4.0mm OD.

Used for inside of the fuel tank

Quantity:
Buy Now:
(+ postage of €6)

Ripmax Nitro Start Up Set L-RMXNSS
A comprehensive pack containing the most useful items required when getting started with glow engine models. Set includes: 2100mAh Glowstart w/Charger, 350cc Fuel Bottle, Flathead and Phillips Head Screwdrivers, Small and Large Wrenches.

Quantity:
Buy Now:
(+ postage of €2)

CNC POM Shutoff Clamps (2pcs) EDN-1153

Quantity:
Buy Now:
(+ postage of €6)

Alu Glowstart w/Meter&Chgr 3600mAh L-RMXGS3600AM    
A 3600mA metal case glowstart with inbuilt power meter. Supplied with appropriate AC charger.

Quantity:
Buy Now:
(+ postage of €6)

Ripmax Glowstart w/Chgr - 3600mAh L-RMXGS3600
A 3600mA glowstart. Supplied with appropriate AC charger.

Quantity:
Buy Now: