The world renowned Futaba14MZ becomes yet more appealing as it is now available in 2.4GHz format, using Futaba's highly developed FASST frequency hopping system. The use of this superb system with the 14MZ allows use of any of the wide range of Futaba 2.4GHz aircraft receivers, from the tiny and super light R6004FF right up to the amazing R6014FS receiver, which despite its full 14 channel capability weighs a mere 21g!

All of the other advantages of the 14MZ are retained in this new version, noteworthy amongst these being the ability to upgrade the software using updates available on the internet, this investment in a top quality radio ensures you are able to take advantage of new software developments as they happen!

Utilising the unique G3 PCM 2048 code, gives Futaba's renowned servos even greater accuracy, in fact twice that of PCM 1024 code. This combines with a frame rate 40% faster than the 9Z, the leading previous generation radio, so that more data is transmitted in the same time, resulting in even more precise control and virtually instantaneous servo response.

Top enable quick and easy access to the powerful software of the 14MZ, Futaba have developed the most advanced colour LCD touch screen ever seen in a radio control transmitter!

A simple touch of the screen will take you directly to the menu you need, not more scrolling through menu after menu to find the one you want.

Features:
2.4GHz FASST transmission
Optional PPM, 1024 PCM, and 2048 PCm transmission with 35MHz module
14 Channels
Dual processors
Lithium Ion transmitter battery
Windows Ce programming processor
Crystal clear 640 x 240 pixel HVGA screen, with adjustable back lighting and contrast
Compact Flash Card data storage and transfer
Voice / music recroding and playback
Sticks with twin ballraces on each axis
Replaceable switches (push, sprung, momentary options)
World's smallest 2.4GHz, 14 channel receiver
Buddy Box facility
Up to 100 model memory
14ch Combo 2.4GHz M2 R6014FS P-CB14MZ2-4G/L Special order only

Taking 12 Channel Control to the Next Level! Brand New 2.4GHz
Version Now Available

When you improve upon all of the best that Futaba 2048 technology has to offer, you have the 12FG -one serious system for discerning R/C pilots. From the state-of-the-art receiver to the capacity to store memories for a whopping 1,882 models, the 12FG has the features and functions to position itself far above the competition. And because it's from Futaba, you can fly with confidence, knowing that the industry's finest research and development is behind you.
12FG Specification:

• G3 2048 resolution
• 30 model memory -up to 1,882 models with a 1GB SD card
• Combines airplane, glider, and helicopter programming
• Supports 13 wing types, 3 tail types, and 8 heli swash types
• 8 total flight conditions (7 plus the default)
• Variable Dual Rates (VDR)
• Servo grouping for servo synchronization
• Digital trims on all 4 main channels
• 7.2V 1700mAh NiMH transmitter battery
• Battery charging jack
• Ergonomic rubber grip

Newly designed "joystick" button and Dial-N-Key editing for easier menu navigating

10ch S3152x4 2.4GHz (N) MM R6014FS      P-FP10CG2-4G     
Futaba 10CG dedicated FASST 2.4GHz radio set. A Full 10 channel system that boasts the rock solid stability of Futaba's 2.4GHz FASST system!
Supplied on 2.4GHz -with the lastest, 21g R6014FS receiver and four digital servos. With a full 10 channels and FASST transmission it has a large, backlit custom LCD screen and highly effective jog-dial to make navigation between menus simple.
Supplied as standard with 15 model memories, this can be increased with the addition of an optional CAMPac. With dedicated aircraft, helicopter and glider programmes, the 10C has exceptional functionality and offers no less than 9 factory defined aircraft mixes, 8 heli mixes, 12 glider mixes and up to 8 freely-programmable mixes, the 10C offers high-end radio performance at a sports system price. Perfect for club and competitions pilots alike, it just has to be seen to be believed!
Full 10 Channels
15 Model Memories
9 Aircraft Mixes
8 Heli Mixes
12 Glider Mixes
R6014FS 21g Receiver
Backlit Custom LCD
Easy Menu Navigation
4 x S3152 Digital Servos
Ni-MHs & Charger

Hot Seller !

If you're looking for a 10 channel, 2.4GHz radio at an unbeatable price – you've just found it! For a limited time, the terrific Futaba 10C is available in `transmitter only' format. With no less than 9 factory defined aircraft mixes, 8 heli mixes, 12 glider mixes and up to 8 free mixes, the 10C offers high-end radio performance at a sports system price.

10ch MM Transmitter 2.4GHz (Tx-N) P-T10C2-4G Does not include receiver

Futaba 8FG 2.4G P-FP8FG/2/4G
The new and innovative Futaba 8FG is the perfect radio for those sport pilots looking to take the next step forward in their flying , as it offers full 8channel FASST 2.4Ghz performance, allied to trend setting new styling and fast and ultra simple programming with its
unique touch sensor input. Supplied complete with the new R6008HS receiver and 4 S3001 servos, thetransmitter is fitted with 1700mAh Ni-MH for extended operating time.
Big, 128 x 64 LCD with backlighting,
adjustable contrast & auto-off
Touch sensor programming
20-model memory (expandable with optional SD card)
Ten character user name
Ten character model name
Basic and Advanced menus
Enhanced aircraft, heli and glider software
Mode 1-4 selectable
(Modes 3 and 4 programmable)
Assignable functions/switches
2 proportional sliders
Digital trims on all 4 main channels
Fail-safe, servo reversing and EPA
Aircraft and heli gyro mixes

8ch MM Transmitter 2.4GHz (Tx-N) P-T8FG2-4G    
The new and innovative Futaba 8FG is the perfect radio for those sport pilots looking to take the next step forward in their flying, as it offers full 8 channel FASST 2.4Ghz performance, allied to trend setting new styling and fast and ultra simple programming with its unique touch sensor input.
Big, 128 x 64 LCD with backlighting, adjustable contrast & auto-off
Touch sensor programming
20-model memory (expandable with optional SD card)
Ten character user name
Ten character model name
Basic and Advanced menus
Enhanced aircraft, heli and glider software
Mode 1-4 selectable (Modes 3 and 4 programmable)
Assignable functions/switches
2 proportional sliders
Digital trims on all 4 main channels
Fail-safe, servo reversing and EPA
Aircraft and heli gyro mixes

7ch S3152x4 2.4GHz (N) MM R617FS P-FP7C2-4G
All the functions and features of Futaba's current 35MHz Field Force 7... but now on 2.4GHz and with even more extras! Other than the short 2.4GHz aerial, it feels just like its best-selling predecessor and the characteristic large LCD, 10 model memory and easy-to-use jog dial remain unchanged. However, it now benefits from the addition of an ailevator mix (two elevator/tailplane halves acting as both ailerons & elevators), a new swash > throttle mix and govenor control.
No corners cut - the new 2.4GHz FF7 is supplied complete with Futaba's new
lightweight R617FS 2.4GHz receiver and four high torque S3152 digital servos!
Superior 'channel-hopping' operating frequency changes every 2 milliseconds - unlike other less advanced systems that operate on one or two fixed frequencies.
High specification system complete with four S3152 digital servos, R617FS 2.4GHz receiver, rechargeable transmitter and receiver packs, mains charger, switch and accessories.

Hot Seller !
7ch Combo 2.4GHz (N) MM R617FS    P-CB7C2-4G
For a limited time, Futaba's FF7 is available in Credit Crunch Combo format! Supplied without servos, it's the perfect way to upgrade from 35MHz to 2.4GHz, without breaking the bank. Perfect if you want a high performance 2.4GHz system, but don't need the servos supplied in the full FF7 system. And with its easy-to-use jog dial and large LCD, you'll be in control in minutes. Perfect!
High specification 'combo' system (no servos included, so you can use with your existing Futaba-equipped models) supplied complete with lightweight R617FS 2.4GHz receiver, rechargeable transmitter and receiver packs, mains charger, switch and accessories.
Superior 'channel-hopping' operating frequency changes every 2 milliseconds - unlike other less advanced systems that operate on one or two fixed frequencies.

Features - General System:
7 Channels
2.4GHz or PPm/PCM 1024 operation
Aero/Heli modes
Custom 72 x 32 display
LCD contrast
Warning LED (Low power)
Rotary 'Jog Dial' program selection
Digital trims with memory
10 Mode memory
Stick mode selection
Selectable trainer facility

Features - General Functions:
Auxilary channel 5 & 7 switch selection
6 Character model name
Up/ Down selectable stopwatch
Reverse - all 7 channels
Failsafe
EPA End Point Adjustment (ATV) - all 7 channels
Sub Trim - all 7 channels
Throttle Cut Switch

Aero Functions:
Dual Rates - aileron, elevator and rudder
Exponential - aileron, elevator and rudder
3 Circuit programming mixing
Throttle Exponential
Elevator/Flap mix
Aileron/Rudder mix
Airbrake mix
Snap Roll mix
Flaperon mix
Elevon mix
V-Tail mix
Flap/Elevator mix
Flap Trim

Heli Functions:
Dual Rates - aileron, elevator and rudder
Exponential Rates - aileron, elevator and rudder
3 Circuit programmable mixing
Hover throttle - VR selectable
Hover Pitch - VR selectable
5 Point Throttle Curve - 3 circuit (Normal/Idle 1/Idle 2/Hold)
Throttle Hold with Rudder offset
6 Swashplate modes
Gyro Mixing
Revolution mix
Switchable 2 circuit Trim Offset

The new 6EXP has been selected as Futaba's first 2.4GHz aircraft/helicopter system, and utilises the highly advanced FASST (Futaba Advanced Spread Spectrum Technology) system to give the ultimate in performance and control. Allowing switch on and go operation, and with amazing interference rejection, this set will become the standard by which all others are measured.

With this set there will be no more waiting for a frequency to become clear, and fellow fliers cannot accidentally shoot you down by mistakenly switching their set on when it is on the same frequency as you, significantly increasing safety and allowing more flying time at popular flying sites. With the operating frequency changing every two milliseconds, the 2.4GHz FASST system is virtually invulnerable to interference, unlike other less advanced systems that operate on one or two fixed frequencies.

Dual antenna diversity selects the best signal from the two receiver aerials, so there is a solid RF link, no matter what the attitude of the model.

The tiny R606FS receiver weights only 9.8g (7g without case), but is a full range receiver that works every bit as well in normal or giant scale models, allowing simple swaps between models. Unlike other systems, there is no separate aerial module that has to be installed, increasing weight and taking up more space.

The 6EXP is Futaba's entry-level 2.4GHz aircraft/helicopter system and utilises the highly advanced FASST (Futaba Advanced Spread Spectrum Technology) system to give the ultimate in performance and control. Allowing switch on and go operation, and with amazing interference rejection, this set is the standard by which all others are measured. With this set there will be no more waiting for a frequency to become clear, and fellow fliers cannot accidentally shoot you down by mistakenly switching their set on when it is on the same frequency, significantly increasing safety and allowing more flying time at popular flying sites. With the operating frequency changing every two milliseconds, the 2.4GHz FASST system is virtually invulnerable to interference, unlike other less advanced systems that operate on one or two fixed frequencies. Dual antenna diversity selects the best signal from the two receiver aerials, so there is a solid RF link, no matter what the attitude of the model. The tiny R617FS receiver weighs only 9.8 grams (7 grams without case), but is a full range receiver that works every bit as well in normal or giant scale models, allowing simple swaps between models. Unlike other systems there is no separate aerial module that has to be installed, increasing weight and taking up more space. Other features include Pre-Vision Packet Screening Technology that scans the incoming data, and applies sophisticated error correction techniques as well as the Easy Link system which incorporates a unique ID code in the transmitter, which when linked with the R617FS receiver, ensures that only this particular receiver will accept commands from its "paired" transmitter.

Never ones to rest on their laurels, Futaba have continued to develop their market leading 6 channel set, and now proudly announce the release of the new 6EXP transmitter, which offers both aircraft and helicopter functionality, together with the ability to operate all Futaba PPM and PCM 1024 receivers (35/40MHz systems only). New additions to the already powerful functions include a second free programmable mix and twin rate flap trim in aircraft mode, and athird swashplate mode and swash/throttle mix in heli mode.
General Features Include:

• 6 model memory
• Dual rates
• Exponential
• PPM/PCM operation
• Failsafe (PCM only)
• Servo reverse
• End point adjustment
• Trainer switch

Available in three different configurations a 'combo' (without servos) and with four standard servos on 35MHz for flying models or on 40MHz for use with surface vehicles. 

Never before has there been an entry level 4 channel computer set with the features of the new 4EX from Futaba. Ideal for anyone taking up model flying, the 4EX has all the functions required for the ultimate in easy setup and operation -without overloading the novice pilot. The transmitter has a built-in charging socket and the set is supplied complete with rechargeable batteries and mains input charger, as well as an R136F full range six channel receiver.

With the included trainer facility, the 4EX transmitter can be used as either the 'master' or 'slave' transmitter for flight tuition and with its mixing functions, the set is capable of controlling models with V tails or flying wings.
As supplied, the transmitter is mode 2 (throttle left), however it is quick and easy to convert to other modes as required.
System Features:

• Four model memory
• Servo reversing
• End point adjustment
• Trim memory
• Exponential
• V-Tail mixing
• Elevon mixing
• Trainer switch
• Multi Mode
• Model select/data reset.

High quality aluminium case that's just perfect for protecting and safely transporting your transmitter and support equipment such as spare crystals, servos and batteries.

• Two tough hinges
• Two lockable over-centre catches
• Handle and removable carrying strap
• Pre-cut foam liner
• Sufficient room for a transmitter, spare servos, crystal case, modules, batteries and more

Adaptor Lead for the Futaba 6EX / FF7 / FF9 / 14MZ

USB SIMULATOR CABLES SET FMS 7.0
This is the FMS Universal Interface cable. This interface works very well with your computer's USB plug and connects to your transmitter via the training connector. The cable is also compatible with JR transmitters ( mini jack ) as well as Futaba, Hitec, E-Sky ( Not 6 Channel Only the 4 Channel ), & E-flite transmitters via the included adapters. Learn how to fly, or improve your existing flying skills with our new flight simulator interface. Great price. Perfect with Blade CP TX. May not work with Walkera (PCM TX)
Minimum system requirements:

• Window ME/2000/XP
• 100% Pentium III or AMD Athlon/64 processor more than 800mHz
• 128MB RAM
• 1GB fere of hard disc memory
• CD-ROM drive
• Open GL compatible graphic card at least 64MB
• 100% DirectX compatible sound card
• USB port

Futaba USB Programming Interface    P-CIU-2
The CIU-2 is a USB interface for communications between futaba Link supported devices and a Windows computer.
Full specifications to be confirmed.   
Specification
Dimensions:18.2 X 56.5 X 9.0 mm
Weight:    7.5g

• FMS Simulator with USB Interface
• Uses the computer lowly to dispose:
• system requirements：Windows2000/XP/ME/9
• Hardware Requsrements CPU：Intel pentsum 600 or above
• 32MB GAP 3D 128MB memory
• Above 10GB hard disk
• 52X CD-ROMport used:USB1.0/2.0
• simulators supported:FMS Version2.0
• Beta 7/FMS Version2.0 Alpha 8.4
• Be used for:helicopter,Airplane,Glider
• Supply Various Aircrafts and Sites

The Phoenix RC simulator has been a huge success enabling a wide range of both Fixed wing and helicopter pilots to improve their skills with a sophisticated and life like representation of RC flying.
Demo Download:http://www.phoenix-sim.com/images/demo/download_button_down.jpg
Demo Requirements

• Microsoft Windows 2000/XP/Vista
• 1.0 Ghz Pentium 3/4 or AMD Athlon/64 compatible processor
• 256MB system memory (RAM)
• 750MB free, uncompressed hard-disk space*
• ATI Radeon 9600/NVidia Geforce Ti4200 with at least 64 MB memory
• Microsoft DirectX 9.0c or higher*
• 100% DirectX 9 compatible sound card (optional)

 
Minimum System Requirements for simulator:

• Microsoft Windows 2000/XP/ Vista *
• Microsoft DirectX9c or higher
• 1GHz 100% Pentium III/4 or AMD Athlon/64 compatible processor
• Geforce 4200/ATI 9600 with 128MB
• 100% DirectX compatible soundcard (optional)
• 256MB RAM
• 750MB free disk space
• CD-ROM/DVD (for install)
• Free USB 1.1/2.0 port

Mac OSX/Windows 95/98 not supported

We are pleased to announce that version 1.05.j has now been officially released.

The full list of changes is as follows:

New Features

• New water system, featuring:
• 3D, Realtime-rendered realistic moving water
• Realtime reflections of models
• Realtime ripples from water interaction
• Improved water interaction physics and floatplane steering
• Streamlined multiplayer code for faster, more stable connections and less lag
• Several sceneries retouched and sharpened
• Shadow intensity accuracy improved
• Portuguese and Italian languages added
• Select alternate sound library from Audio Options
• Show Frame per second from View menu
• Zoom in on transmitter display under View menu
• Hitec Optic 6 profile added
• Hotkeys view added to View menu

Improvements

• Camera panning improved when simulation is paused
• Tail rotor/gyro interaction improved for smoother, more precise tail reaction on helicopters
• Added Airtronics RD8000 profile
• Improved profile creation process
• Improved Ttransmitter/Interface connection warnings
• Improved rotor governor response
• Improved tail flick on light electric helicopters
• Added "Servo Delay" editable attribute under Tail section
• Added "Tail wash" editable attribute under Fine Tuning section
• Multiplayer error with incorrect model now shows an icon and does not eject pilot
• Improved spinning effects on rotors
• Improvement on lighting system
• Improved scrolling/lookaround when paused
• Preset CCPM demix for Esky 0406A in Advanced Calibration
• Bugs fixed

Favourites issue fixed

• Knight 3D issue with over 100% simulation speed fixed
• Wind random direction issue fixed
• Beriev flaps + description
• Spitfre wheels no longer penetrate canopy
• Lower blades on Blade CX2 blades no longer faces wrong way
• Various mapping profile creation, copying and deletion issues
• Do not restart handlaunched models when options for no restart is selected
• Reduced tail wash on T-Rex 500
• Fixed error in multiplayer when host changes to scenery not installed
• Fixed high/low wing trainer issue on long-grass flying fields

Please note: You must have at least version 1.04.j in order to download this update.
You will also need to have a jack to whatever transmitter connection to add to this package.
The USB SIMULATOR CABLES SET FMS 7.0 covers most transmitter connections.