The multilayer Mitt system for complete protection €55 (+ postage of €10) The unique Raydiowarm™ design helps keep hands and transmitter warm and dry ~ even in the worst weather Polyester with laminate backing Fleece lined for warmth and comfort Velcro® closures Rigid base and sides Removable waist strap Padded neck strap UV protected pvc window Aerial/antenna hole fitting kit Elasticated cuff Helps keep hands warm for longer Helps extend battery life Protects your transmitterMore sensitive control without gloves Choice of colours/combination Quantity: 12345678910 Options: Please select ...Black/PurpleBlack/BlueBlack/Grey Colour: Buy Now: Winter transmitter glove €45 (+ postage of €10) Flying in the in the COLD??  We have perfected the giant scale aerobatics Transmitter glove.  Guaranteed to keep your hands warm on the coldest day at the field, while leaving your hands free to manipulate the sticks. Velcro access to allow fast loading of TX. Heavy duty canvas material exterior, felt lining interior. Internal structure to keep the glove from interfering with the sticks. Clear HARD window to provide hand clearance and view TX controls. Window slot to allow for neck straps (recommended) Elastic strap to hold TX in place while in the glove The glove works so well that even without a hand warmer that after 15 minutes of flying in sub zero weather the window actually starts to fog.  That's right, 15 minutes and your fingers are still comfortable. Quantity: 12345678910 Buy Now: Lipo Safe Bag (180 x 215 mm) €16 (+ postage of €3) Click here to see why we use Li-Po safe bags The LiPo Safe is bag made of special fire-resistant materials that has the ability to contain a lithium polymer battery fire or charging mishap. place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they're in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe's fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe. The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap from 1 to 6 lipoly cells (1s to 6s). Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged. LIPO SAFE USING PRECAUTION Ensure that charger rate is properly set and polarity is correct Attach charging leads to battery Place battery in LiPo Safe towards the bottom Place LiPo Safe on non-flammable surface Route charge leads through vent at the top seam of the LiPo Safe Close top flap of LiPo Safe and press hook and loop closure fully closed Charge battery using proper charging practices Always practice extreme caution when charging and never leave a charging battery unattended Quantity: 12345678910 Buy Now: Mini Training Kit €6 (+ postage of €2) Save parts on minor crashes using the training kit Quantity: 12345678910 Buy Now: Medium training Kit €9 (+ postage of €2) Save parts on minor crashes using the training kit Quantity: 12345678910 Buy Now: Helicopter blade fix mount 300 size €4 (+ postage of €2) Keep your blades tucked away and release the pressure off them. Quantity: 12345678910 Buy Now: Blade fix mount - 600 size €5 (+ postage of €2) Will fit 500 and 600 size helis Quantity: 12345678910 Buy Now: Neck Strap €5 (+ postage of €2) Great for resting your transmitter while flying Quantity: 12345678910 Buy Now: KX150006A Radio Sling Neck strap €6 (+ postage of €2) Quantity: 12345678910 Buy Now: Curtis Youngblood Radix Foam Blade Holder €8 (+ postage of €3) New Radix foam blade holders that fit both the 50 and 90 size. Only one pair not as illustrated Quantity: 12345678910 Buy Now: Blade Tracking Color Sticker Tapes €3 (+ postage of €2) These stickers are a must in order to track your heli blades. Red and Blue, 65mm x 5mm, 10 pairs  Quantity: 12345678910 Buy Now: Blade Tracking Tape €4 (+ postage of €2) This is Red Tracking Tape. This is Used to help Balance Helicopter Blades. Simply apply a strip or two of the tape to the lighter blade to bring them back into balance with each other. This tape will also make the blades more visible by adding a different color to the white blades. Quantity: 12345678910 Buy Now: Double sided sticky tape €3 (+ postage of €2) Great Planes double sided foam servo tape works great for mounting servos and receivers to car, airplane and boat models.FEATURES: Super sticky adhesive on both sides for secure holding powerINCLUDES: One roll of double sided servo tape Quantity: 12345678910 Buy Now: Field bag €35 (+ postage of €8) Finally, a handy way to carry everything a modeler might need at the field or track: tools, fuel, parts, radios, chargers, propellers, manuals and more. Soft-sided, durable bag Carries up to a gallon of fuel Made of durable 600D nylon, 3/8 closed cell foam Easy to clean Field Tote Key Features Soft-sided, durable bag Carries up to a gallon of fuel Made of durable 600D nylon, 3/8 closed cell foam Easy to clean Overview Finally, a handy way to carry everything a modeler might need at the field or track: tools, fuel, parts, radios, chargers, propellers, manuals and more. Quantity: 12345678910 Buy Now: Aluminium Case for Helicopter 300 size €45 (+ postage of €15) A great and safe way to carry your heli, transmitter, batteries, charger and spare blades with you. Honey bee King 2 and other 300 size helis up to 545mm. Quantity: 12345678910 Buy Now: ALUMINUM CARRYING CASE T-REX 450 size €45 (+ postage of €15) ●Fits to T-REX 450X/XL/SE. Belt Cp and Outrage G5.Includes Aluminum case, sponge and sling. The contents pictured are not included.●Diameter:698x203x284(mm)●Weight:3.4kg Quantity: 12345678910 Buy Now: Mini Heli Tote Champions Series - T-REX 450 €32 (+ postage of €8) Protect your heli, orgainize all tools and accessories in place when travelling.  This new Heli Tote is light weight and comes with a comfortable neck strap and can hold all your accessories and your assembled heli in one fashionable way. Designed specially for T-REX 450 and others 400-450 size helicopters  Strong red color cloth material to protect the heli. Extra large side pockets for better insert of transmitter. Designed with extra space in the interior main compartment to hold all the tools, batteries, and even a charger securely. Quantity: 12345678910 Buy Now: Aluminum Control Stick for Esky, Futaba, Walkera €8 (+ postage of €2) Flower Stick for Esky, Walkera, Futaba Transmitter. Suitable for Esky, Walkera and Futaba Transmitters. Enlarged stick head provide more friction to your finger tips and thus gives a more a precise control of movement. The length of the stick can be adjusted and fixed with a set screw(included). Quantity: 12345678910 Buy Now: Rotorworkz "Stick Radio Knobs (Red) for Futaba €12 (+ postage of €2) Rotorworkz "Stick Bling" knobs are designed for Futaba radios. It fits perfectly on the gimble thread on Futaba radios. It is designed for both pinch and thumb flyers. Pinch flyers can benifit from knurled and slotted sides with better grip and better control during long flights. Thumb flyers can benifit from ring groves which do not have sharp edges like stock ones. These ring groves will massage your thumb nerves and make you feel much more comfortable during long flights.Features: Designed for both pinch and thumb flyers Ergonomics design, comfortable and stylish Available with different anodizing colors Adjustable height with stainless steel set screws Specifications: Size: 9/16" or 15mm Quantity: 2pcs Color: Blue or Red Stainless steel set screws M3x3: 2pcs Quantity: 12345678910 Options: Please select ...red blue Colour: Buy Now: Velcro loop strips €5 (+ postage of €2) Great velcro strips using to secure your battery, receiver and gyro.  Protect them from falling off the heli in crash.  Very handy and inexpensive. Length: 150mm Width: 1.6mm Total 4pcs. Quantity: 12345678910 Buy Now: Velcro hook & loop 1X6'' (2) €6 (+ postage of €2) Great Planes hook and loop material is Velcro brand for unsurpassed quality. INCLUDES: Two 1" x 6" strips of adhesive backed velcro. Quantity: 12345678910 Buy Now: Receiver protector €4 (+ postage of €2) These are important tools to protect your receivers from vibration and shock. Quantity: 12345678910 Buy Now: Rubber heli pad €25 (+ postage of €10) Throw away the flimsy cloth prepare towel that can be blowed away in the windy field.  This hi-strength plastic sport mat is perfect for small electronic helicopter stationery pit.  It can store a lot of small parts such as tools, screws, electronics, parts...  It makes repairing the helicopters at the field an easy job.  Also served as the helicopter landing pad where the surface is not even.  Very cool helicopter logo is embedded in the middle of the mat. 13.5 x 17inches Quantity: 12345678910 Buy Now: GREASE WHITE LITHIUM €6 (+ postage of €2) This is a Tube of White Lithium Grease from Traxxas.This product can be used to lubricate parts, such as gears.FEATURES: Great lubrication for nylon gearINCLUDES: One tube of lithium grease (volume unknown)REQUIRES: Application to parts needing lubrication. Quantity: 12345678910 Buy Now: ZAP PT42 Loctite THREADLOCKER .20 OZ €5 (+ postage of €2) Pacer has designed this bottle of Threadlocker Compound to be used on metal fasteners. It is not recommended for plastic parts Size: 0.20 ounces (6ml) Medium strength general purpose thread locker Locks threaded fasteners against vibration Perfect for use in helicopters and all RC cars Clean and dry parts for best results (removing grease, oil and dirt) Parts can be returned to service immediately in MOST CASES Thread locking compound comes in a Red bottle with a clear nozzle tip This bottle of glue will appear big in context to the glue. The reason being is the glue requires a large amount of oxygen or the glue will dry out. All one would need to do once you have the glue is shake the bottle and turn upside down,if the tip turns Blue then the glue is present. To some the bottle may appear empty. Quantity: 12345678910 Buy Now: Z71 Red Threadlock €5 (+ postage of €2) Very High Strength, Locks and seals metal nuts, bolds and studs. Resistant to oil, gasoline etc.... Quantity: 12345678910 Buy Now: Double epoxy €6 (+ postage of €2) Super strong formula. Mix the two tube and away you stick! Quantity: 12345678910 Buy Now: Welding compound €12 (+ postage of €2) J-B Kwik is Tough... and Fast!  For all your repair needs******AMERICA's TOUGHEST WELD********* For over 20 years J-B WELD cold weld compound has satisfied millions of American customers with its superior repoar bond quality.  The unique J-B WELD formula of liquid steel and compound harrdner fixes, fills and bonds most surfaces, including metals, woods, ceramics, and glass.USE FOR AUTOMOTIVE, PLUMBING, IN THE HOME and HOBBIESEssential tool for all helicopter flyers.  Don't scrap it! J-B it! and SAVECome with 2 tubes each 28.4g.Instruction for use included. Easy to use Cure in 4 hours Withstands temperatures up to 300F Easy clean up with soap and water Try it and tell a friend.  Quantity: 12345678910 Buy Now: ZAP PT15 ZIP KICKER 2 OZ SPRAY €8 (+ postage of €3) Pacer ZIP KICKER Super-Glue Accelerator is the best working accelerator forZAP and Other Super Glues.  A Little Spritz Works in Seconds.FEATURES Forces cure of large amounts of SLO-ZAP when forming fillets. Solves tough-to-bond application Environmentally safe Formula Will not craze most plastic INCLUDES: One 2oz aerosol can of Zip Kicker Quantity: 12345678910 Buy Now: Tie Wrap 6" 150mm (20pcs) /Black €1.5 (+ postage of €2) Keep all the cables in your helicopter neat and tidy with our 100mm tie wraps. 4" inchesQuantity = 20pcs Quantity: 12345678910 Buy Now: Receiver Antenna Cable (600mm x 2 pcs) €4 (+ postage of €2) Quantity: 12345678910 Buy Now: Antenna 6pcs (380mm) €3 (+ postage of €2) Quantity: 12345678910 Buy Now: Fiberglas tape 3M €8 (+ postage of €2) Very strong tape used to reinforce foam planes, joints or flaps. Quantity: 12345678910 Buy Now: Stabilizer for Neck Strap (Futaba, JR, Spektrum tr €14 (+ postage of €2) Helps to balance your transmitter on the neck strap Buy Now: OUTRAGE Velcro Hook and Loops - BLACK (4pcs) €9 (+ postage of €2) Great velcro strips using to secure your battery, receiver and gyro. Protect them from falling off the heli in crash. Very handy and inexpensive. Length: 260mm Width: 16mm Qty: 4pcs Weight: 1.1g/pcs Quantity: 12345678910 Buy Now: 3D-X450 Inverted Flight Training Kit Plastic Editi €25 (+ postage of €4) -As a stuff of the competition and entertainment sports, Radio-control helicopter is very beloved by the hobby fans. And 3D Inverted Flight is every hobby fans' target. At present, the inverted flight practice is always based on experienced upright flight. That is, we should invert the helicopter in the air and make the propeller downward before the inverted flight. But while the inverted flying is carrying on or has finished, the flying directions and operation of helicopter are reverse, so it is easy to get a wrong operation and the helicopter will get out of control. And it will be no time to adjust the position of the helicopter and use the landing gear to land, which leads to a crash. -This Inverted Flight Training Kit could solve the above problem. -It includes: Fuselage with landing gear, Rotor head which can connect with helicopter rotor head, Patulous Frame (1) which is made of X long glass fiber rod with four sponge balls and Tail connected bracket. -Through a connector with a rotor axis which is connected with a 450 helicopter, it can become a landing gear which is able to land the upside-down helicopter directly. In this way, it could avoid the crash during 3D inverted flight practice. And then the hobbyists can practice inverted courses from the ground easily, such as take-off, hovering and landing. -While practicing the inverted flight, the helicopter can be inverted on the ground directly and supported by Landing Gear (4). Whereafter, take off the helicopter and practice inverted flying in the air. Land downward without righting the helicopter, and it will be supported by Landing Gear (4). Besides, the set also apply to normal takeoff. Take off without inverting the helicopter, and then invert it in the air. When the helicopter is out of control by wrong direction operation, it can land without righting its body. If it is too late to operate, Landing Gear (4) will protect the helicopter after fall. Length: 525mm Width: 115mm (the width of patulous frame excluded); 585mm (the width of patulous frame included) Height: 125mm (the width of patulous frame excluded); 175mm (the width of patulous frame included) Weight: 130g (plastic); 150g (metal) Usage: All of 450 series helicopters Quantity: 12345678910 Buy Now: HELI-MAX .50-.60 Size Floats €29 (+ postage of €9) Floats Designed for .50 to .60 size Helicopters.FEATURES: Constructed of Heavy Duty Vinyl Easy to Mount and RemoveINCLUDES: Two Inflatable Floats Two Plywood Supports Two Aluminum Mounting Brackets Eight Phillips Head Mounting Bolts Eight Hex Nuts Sixteen Lock Washers Instruction SheetREQUIRES: Phillips screwdriver 5mm hex wrench Some assemblySPECS: Floats are 26"x 8" before inflationCOMMENTS: Good for Calm bodies of water Only, not for beginners! Quantity: 12345678910 Buy Now: Hobbico Parts Box 7x4x1" w/Adjustable Compartment €6.50 (+ postage of €3) This is the small Clear Plastic Parts Box from Hobbico. Hobbico parts boxes are ideal for organizing small modeling parts like bearings, screws, parts, gears, small tools, greases, adhesives and so on. FEATURES: Clear plastic construction          Adjustable dividers to vary compartment size          Lid latches closed to avoid losing part INCLUDES: One small parts box          Fifteen compartment divider SPECS:    Box is 7" x 4" x 1" COMMENTS: There are two permanent dividers running lengthwise (making three compartments). The adjustable dividers can be inserted to make as many as 18 individual compartments. Quantity: 12345678910 Buy Now: Hobbico Parts Box 11x7x2" w/Adjustable Compartment €7 (+ postage of €3) This is the medium Clear Plastic Parts Box from Hobbico. Hobbico parts boxes are ideal for organizing small modeling parts like bearings, screws, parts, gears, small tools, greases, adhesives and so on.FEATURES: Clear plastic construction          Adjustable dividers to vary compartment size          Lid latches closed to avoid losing partINCLUDES: One medium parts box           Twelve compartment dividerSPECS:    Box is 11" x 7" x 1¾"COMMENTS: There are two permanent dividers running lengthwise (making three compartments). The adjustable dividers can be inserted to make as many as 18 individual compartments. Quantity: 12345678910 Buy Now: Hobbico Parts Box 14x9x2" w/Adjustable Compartment €10.50 (+ postage of €3) Hobbico Parts Boxes are an Inexpensive Way to Keep Your Small Parts like washers, bearings, bushings and so on, neatly organized and always handy. This item has a 90 day warranty. FEATURES: Clear Durable Boxes that Allow Fast Location of Parts Dividers are Molded in to Prevent Small Parts From Sliding Between Sections          Two Locking Tabs to Hold the Lid Tight          Wormproof (per manufacturer)          Resists Common Chemical INCLUDES: One Parts Box with 3 fixed dividers          Twenty Divider SPECS:    Length: 14"          Width:   9"          Height:  2" Quantity: 12345678910 Buy Now: EK2-0852 Car Charger cigarette adaptor €5 (+ postage of €2) This is very convenient when out driving why not get your batteries charged too. Quantity: 12345678910 Colour: Buy Now: UHU Hart 35g – Balsa Cement €3 (+ postage of €2) Clear, fast drying adhesive. Ideal for model building or general use at home. Quantity: 12345678910 Buy Now: UHU Por 50 ml – Polyfoam Glue €3 (+ postage of €2) Fast drying contact adhesive, designed for bonding expanded polystyrene components. Quantity: 12345678910 Buy Now: Zap-O Odourless CA – 20g/0.7oz €8.5 (+ postage of €2) With its odourless "no more tears" formula, Zap-O is suitable for balsa and plywood but is also safe for all hobby foams. Its medium thick formula offers extended cure times of around 15 seconds. Quantity: 12345678910 Buy Now: Aluminium Case – Single Transmitter €25 (+ postage of €10) High quality aluminium case that's just perfect for protecting and safely transporting your transmitter and support equipment such as spare crystals, servos and batteries. Two tough hinges Two lockable over-centre catches Handle and removable carrying strap Pre-cut foam liner Sufficient room for a transmitter, spare servos, crystal case, modules, batteries and more   Quantity: 12345678910 Buy Now: Blue Aluminum Magnetic Tray €6 (+ postage of €6) Material: aluminum alloyColour: blueWeight: 41gLength: 106mmWidth: 86mmHeight: 14mmMagnetic cushion:Length: 87mmWidth: 67mmThickness: about 0.7mm Quantity: 12345678910 Buy Now: Phoenix RC simulator phoenix-sim1 €90 (+ postage of €6) The Phoenix RC simulator has been a huge success enabling a wide range of both Fixed wing and helicopter pilots to improve their skills with a sophisticated and life like representation of RC flying.Demo Download:http://www.phoenix-sim.com/images/demo/download_button_down.jpgDemo RequirementsMicrosoft Windows 2000/XP/Vista1.0 Ghz Pentium 3/4 or AMD Athlon/64 compatible processor256MB system memory (RAM)750MB free, uncompressed hard-disk space*ATI Radeon 9600/NVidia Geforce Ti4200 with at least 64 MB memoryMicrosoft DirectX 9.0c or higher*100% DirectX 9 compatible sound card (optional) Minimum System Requirements for simulator:Microsoft Windows 2000/XP/ Vista *Microsoft DirectX9c or higher1GHz 100% Pentium III/4 or AMD Athlon/64 compatible processorGeforce 4200/ATI 9600 with 128MB100% DirectX compatible soundcard (optional)256MB RAM750MB free disk spaceCD-ROM/DVD (for install)Free USB 1.1/2.0 portMac OSX/Windows 95/98 not supportedWe are pleased to announce that version 1.05.j has now been officially released.The full list of changes is as follows:New FeaturesNew water system, featuring:3D, Realtime-rendered realistic moving waterRealtime reflections of modelsRealtime ripples from water interactionImproved water interaction physics and floatplane steeringStreamlined multiplayer code for faster, more stable connections and less lagSeveral sceneries retouched and sharpenedShadow intensity accuracy improvedPortuguese and Italian languages addedSelect alternate sound library from Audio OptionsShow Frame per second from View menuZoom in on transmitter display under View menuHitec Optic 6 profile addedHotkeys view added to View menuImprovementsCamera panning improved when simulation is pausedTail rotor/gyro interaction improved for smoother, more precise tail reaction on helicoptersAdded Airtronics RD8000 profileImproved profile creation processImproved Ttransmitter/Interface connection warningsImproved rotor governor responseImproved tail flick on light electric helicoptersAdded "Servo Delay" editable attribute under Tail sectionAdded "Tail wash" editable attribute under Fine Tuning sectionMultiplayer error with incorrect model now shows an icon and does not eject pilotImproved spinning effects on rotorsImprovement on lighting systemImproved scrolling/lookaround when pausedPreset CCPM demix for Esky 0406A in Advanced CalibrationBugs fixed Favourites issue fixedKnight 3D issue with over 100% simulation speed fixedWind random direction issue fixedBeriev flaps + descriptionSpitfre wheels no longer penetrate canopyLower blades on Blade CX2 blades no longer faces wrong wayVarious mapping profile creation, copying and deletion issuesDo not restart handlaunched models when options for no restart is selectedReduced tail wash on T-Rex 500Fixed error in multiplayer when host changes to scenery not installedFixed high/low wing trainer issue on long-grass flying fieldsPlease note: You must have at least version 1.04.j in order to download this update. You will also need to have a jack to whatever transmitter connection to add to this package. The USB SIMULATOR CABLES SET FMS 7.0 covers most transmitter connections. Quantity: 12345678910 Buy Now: Filtered Fuel Tank Klunk L-IP181/10 €1.80 (+ postage of €2) Filtered Fuel Tank Klunk L-IP181/10Reduce the chance of air bubbles entering your engine with this clunk    Quantity: 12345678910 Buy Now: A3 Cutting Mat - 450 x 300mm T-RT305 €8 (+ postage of €6) A3 Cutting Mat - 450 x 300mm    T-RT305    Specifically designed for use with modelling knives and scalpels, these cutting mats are made of a material that actually 'heals' after the blade has been drawn over it, plus they help prolong the life of the blade itself. With their long lasting, non-slip surfaces, these mats are essential purchases for every modeller - especially those who build on the kitchen or dining room table! Quantity: 12345678910 Buy Now: Cable Ties (3.5mm X 140mm) X 100Pcs €5 (+ postage of €3) Useful for all applications big and small Quantity: 12345678910 Buy Now: Cable Ties 92.5mm X 100mm) X 100Pcs €3.5 (+ postage of €3) Useful for samller applications Quantity: 12345678910 Buy Now: RealFlight G4.5 Mode 2 Tx A-GPMZ4435 €175 (+ postage of €6) RealFlight has again sharpened its already near-perfect reproduction of R/C flight. With improved sights, sounds and physics, the new G4.5 carves away like never before at the very thin line between "real"...and RealFlight. Nothing comes close for realism, or for the variety of models to fly. Select from over 70 stock aircraft and straight away you'll notice G4.5's improved physics in how models operate on the ground. Explore more than 25 richly detailed flying sites, and you will see how Real Rendering brings out significantly more fine detail in aircraft and other objects, without placing high demands on your computer's processor. Land on an uneven surface and you'll hear the wheels and landing gear bump. Servo motors whirr...water splashes...even a wing scraping concretes sounds perfectly true-to-life!-Depth of Field EffectRealFlight's new Depth of Field effect lets anything outside the immediate vicinity of your aircraft lose sharpness — helping you stay focused on your model. Four levels of the effect are available, as well as "Off".-Real Rendering™Without placing high demands on your computer's processor, Real Rendering brings out significantly more fine detail in aircraft and other objects. Like Depth of Field, it can be turned on or off — whichever you prefer.-More Sound EffectsEven with your eyes closed, you can enjoy the unprecedented realism of G4.5. Land on an uneven surface and you'll hear the wheels and landing gear bump. Servo motors whirr...water splashes...a wing scraping concretes sounds perfectly true-to-life.-More Flying Site DetailSimulated shadows have never looked more natural as they move across objects, buildings and foliage. Reflecting surfaces capture surrounding images and colors with breathtaking accuracy.-Enhanced PhysicsYou'll notice G4.5's improved physics particularly in how models operate on the ground. Handling responds realistically to the hardness of surfaces (with more resistance in grass than on asphalt, for example).-Expanded Training ToolsG 4.5's Virtual Flight Instruction now includes a helicopter autorotation trainer — and to start a training session, you just follow simple prompts in the "Welcome" and "Get Ready" windows. Three pre-set levels (Beginner, Intermediate, and Advanced) let you choose how sensitive you'd like the physics to be. You can also create an unlimited number of Custom levels.-ore Multiplayer OptionsThere's more "new" to G4.5's Multiplayer feature than just faster, easier connections. Now you can block out other users if desired. Or add your own computer microphone and chat "live" with other pilots, just like at the flying field!-More AircraftSelect from over 70 stock aircraft, including many making their first appearance in RealFlight — such as the Schneider Cup Racer, AR-6 Endeavor, Harrier, Heli-Max™ Axe™ 400 and Miniature Aircraft® X-Cell® Furion™ 450.-More Flying SitesExplore more than 25 richly detailed flying sites. G4.5 introduces two brand new PhotoField™ sites: Santa Clara County Model Aircraft Skypark and Gold Country Aeromodeler ParkNew InterLink Elite controller based on Futaba's popular 6EX offers the look & feel of a full-size transmitterNow controls all basic software functions - virtually eliminates the need for mouse and keyboard!If you prefer to use your own transmitter, the InterLink Elite already has the interface you need built in and with 'MultiMode' you can even use the controller and interface simultaneously - a feature no other simulator has!Accurate digital trimsAdjustable sticksPush button resets Quantity: 12345678910 Buy Now: Ripmax Catalogue 2009 U-RMX2009 €7 (+ postage of €8) Ripmax Catalogue 2009    U-RMX2009Launched as we celebrate our historic 60th Anniversary, the new Ripmax Catalogue is here. And we think it's our best yet! More of the Catalogue is devoted to aircraft, helicopters, cars, boats, radios, engines and accessories this year as the spares section has been replaced by easy-to-use exploded views on this website. Quantity: 12345678910 Buy Now: Foam ARTF Glue Kit S-SE41 €15 (+ postage of €6) Foam ARTF Glue Kit    S-SE41Specifically designed glue kit for the construction and repair of most Depron, EPS and Styrofoam models. It contains a bottle of Foam 2 Foam, Speed Epoxy, foam-safe Roket Odourless cyano and Foam Blaster to protect and activate foam surfaces for instant bonding. Quantity: 12345678910 Buy Now: Xtreme Production Mouse Pad, Landing Pad EAS002 €12 (+ postage of €4) Xtreme Production Mouse Pad, Landing Pad (20mm Diameter) Quantity: 12345678910 Buy Now: Trainer Lead (Square to Square)Fut P-TC-SQ €21 (+ postage of €3) Trainer Lead (Square to Square)Fut    P-TC-SQIf you're teaching someone to fly, there can be no safer or simpler system than by using a trainer lead between two compatible transmitters. If the student experiences a problem, control can be taken back by the instructor at the flick of a switch. Quantity: 12345678910 Buy Now: