3/32" (2.3mm)Bore Silicone - 1ML-ST189

Fuel Line Plugs (Pk2)    L-IP175/10

Sullivan. Crap Trap Fuel Filter-Small    L-SLN187
Two sizes of clear twin gauze filter for removing all debris from your fuel. The slim standard size is designed for in-model use while the larger version is best suited to your flight box fuel supply line. The clear body permits inspection for cleaning.

OS Super Filter - Small    X-OS72403051

OS Non bubble weight (s) L-OS71531010

Stop Plug w/Mount Ring (Pk2)    L-MG267
Instead of using a screw or bolt to blank off a fuel vent tube, try our beautifully machined versions with optional mounting ring which locates in the cowl or fuselage side. With a knurled head for easy removal, these make a practical and far more attractive alternative.   

Fueling Valve    L-IP160    

Starter Rubber - Aircraft    L-MG297
Ming Yang low cost replacement starter cone rubber suitable for the majority of starters. It can be reversed to make direct starts on the propnut or safety nut if you don't use a spinner.

Kavan Starter Rubber -Spinner(Soft)    L-FK112A
Don't wreck your spinner when your starter rubber's long past its useful life, just swap it for this low cost insert, shown below. The Car Start Rubber also shown below presses onto just about any 12v starter to give you a hi-grip starting wheel.

Adjustable Engine Mount 40~70    L-RMX251   

Engine Starter Stick    L-RMX270
This durable, lightweight, starter stick has a solid wood handle that's shaped to fit comfortably into the hand with a ribbed section for increased grip. The end of the stick has a non-slip rubber sleeve that won't damage the prop during starting.

Power Panel - Flight Leader    L-FLPP01   
A reliable, solid state Power Panel that supplies power to your starter, 12v fuel pump and 1.5v glow plug - all from your sealed 12v flight box battery.

Remote Glow Unit    L-IP135/10   
The finishing touch to a scale model or ideal for use as a remote glow unit on any model. Suitable for most glow plugs.

Glowstart w/NiCad - 1700mAh    L-IP121
If you don't have a power panel the Ripmax 'Glowstart' has become the accepted way to fire up your engine. The Glowstart combines a locking glow clip, designed to fit standard 2-stroke or 4-stroke plugs, together with a high capacity 1.2v, 1700mAh, rechargeable ni-cad.

4 Way Wrench (Long) - 8/9/10/12mm    L-MG103
Handy glow plug wrench with spare glow plug holders. 8mm, 9mm,10mm and 12mm nut drivers.

Glowplug No 10 (A5)CoolL-OS71605100

Glowplug No.8 (Medium)    L-OS71608001

Glowplug No.8 (Medium) Card of 10 

APC Propeller
APC produce one of the largest range of propellers available today. Known for their low noise characteristics due the highly efficient blade shape and exceptional stiffness thanks to the use of long strand glass/nylon material. With sizes ranging from 6~20" (152~508mm) diameter, there is a prop to suit almost any engine.

Irvine Hand Fuel Pump    L-IRVFP1
A compact, high volume hand operated fuel pump for use with glow fuels. Supplied with tank filter, fuelling probe and fuel tube. Can be mounted to the side of a flight box with the two self tapping screws included.

Irvine 12 Volt Fuel Pump    L-IE63
A high quality fully sealed and reversible 12 volt fuel pump featuring tough, straight cut pumping gears and silicone 'O' ring seals. The durable external case has moulded on mounting points for easy installation in your flight box.This pump should only be used with glow fuels. For maximum service life, the pump should always be mounted with the fuel tube connectors at the bottom.

A low cost flight box, supplied complete with adjustable models stand, a single drawer, space for a fuel bottle, power panel, 12V battery and more. Supplied flat packed in kit form for easy assembly and finishing.
Note: Contents shown not included, for illustration purposes only.

Irvine Flight Box    L-IRVFB01   
Supplied pre-built and factory finished in fuel resistant varnish, this high quality flight box comes complete with handy pull-out parts storage tray, high capacity drawer and sturdy aluminium carrying handle.

Recoil Vinyl Fuel Tube 5ft    L-IP003   
Forget about yards of trailing tubing from your flight box when you're filling the tank - just get a length of recoil tubing and do the job properly! The vinyl recoil tube is suitable for both glow fuel and petrol.

Flight Leader Pro Starter 12v    L-FLST01
Choosing the right starter first time is a sound decision that will pay dividends later. The Pro-Starter has been built to a tried and tested design with no compromise to quality and performance. Shown right, the Pro-Starter comes complete with both 4mm gold bullet connectors and crocodile clips which are interchangeable in seconds to suit your power source - whether it's direct to a 12v battery or via your charger power. If it's for aircraft, helicopters, cars or boats, the level of torque and smoothness is comparable with starters costing twice as much.

Irvine Ultra Starter - 12V    L-IRVST2   
A high power electric starter with modern styling that performs as good as it looks. Instant 12v power is delivered to the starter cone from the positive on/off switch. Comes with heavy duty crocodile clips, and a reversible colour matched rubber cup for engines with or without spinners.

Kavan Starter    L-FK111   
Don't be put off by its diminutive size - this is a compact but surprisingly powerful starter due to its unique internal planetary geared design. Supplied complete with battery leads with crocodile clips and a reversible rubber cone for spinners or prop nuts.

Sullivan Deluxe Hi-Tork Starter    L-SLN601
The Hi-Tork starter is suitable for all sport engines and as its name suggests, is capable of starting much larger capacity engines. Supplied complete with a durable aluminium pulley complete with belt start 'V' groove.

Superior Starter(For Airplane) HFSSTQ02
Ergonomically designed for optimal hand grip to prevent slippage, light
weight, and easy to assemble/disassemble for transport ease. Suitable
for fixed wing airplanes or helicopters, engine can be started with a
simple one hand press on the button.

Suitable for up to 50cc gasoline engine or 300 class nitro engine.
Designed for user replaceable, common 450 heli sized
3S1P 1900~2300mAh/16c lipo batteries. Fully charged battery is
capable of 500 starts and beyond. Battery packs are charged with any
T-REX 450 battery chargers.

Starting adaptor includes double one way bearing design.
High efficiency motor providing high starting power, and low reacting
force.
LED battery voltage indicator and over-discharge protection circuitry.
Battery undervoltage protection.
Overheating protection
Protection against stalling by flooded torque overloading engine.

Specification:
Suitable battery:Li-Po 3S1P 11.1V 1900~2300mAh 16C and above(maximum size 112x35x24mm)
No load rotation speed:2300rpm
Battery undervoltage:10.8V
Quiescent current:0 mA
Motor overheat protection:80°C
Decelerate gear ratio:5.3:1
Size:80x60x390mm
Weight:700g (w/o battery)
Accessories:
Starter body x 1
Airplane spinner cup x 1
Option:
Battery:3S1P 11.1V 1900~2300mAh 16C and above Li-Poly battery

Sullivan DynaTron Starter    L-SLN603
Designed for tougher applications, such as ducted fans, large model boats and helicopters, the Dynatron packs a massive punch. Can also be run on 24v batteries for even more power. Serious power for serious modellers!

12V 7A Power-Peak SLA Battery    O-PRP1207   
Features Include:
Maintenance-free operation.
Low self discharge (long shelf life). At room temperature the self-discharge rate of Pro-Power batteries is approximately 3% of the rated capacity per month.
Spill proof construction.
Economical price.
Uses only the highest grade materials.
Wide operating temperature (-15°c to +35°c).
Can operate in any position without loss of capacity or service life.
Fitted with safety pressure valves.
Long service life.
Designed for both Cycle and Standard usages. (Can standby for up to 8 months without loss of efficiency or any appreciable deterioration of the battery).

3.17mm / 8mm Plain Nut    E-RMX099

3.17mm / 8mm Domed Nut    E-RMX100

Model Motors Uni. Prop Saver 3.17    E-MMSA317   

3.2mm Adapter for Slim Props    E-SL100

Electric Flight Prop Adaptor (540/600)    E-SL099

Propsaver - 3mm ShaftE-RAA1700/3

Propsaver - 3.2mm (1/8") Shaft    E-RAA1700/3-2

O Rings for AA1700 Series    E-RAA1710

Prop Adaptor 3mm KMS    E-KMS108350
Prop Adaptor for 3mm threaded shaft includes back and front plates and 2 Lock nuts. Fits all KMS motors.

Free Flight Wheel – 51mm/2" (Pk2)      F-RAA1377
Moulded from a tough solid plastic to a thin profile and with minimal weight, these three sizes cater for most free flight and indoor models.

The Phoenix RC simulator has been a huge success enabling a wide range of both Fixed wing and helicopter pilots to improve their skills with a sophisticated and life like representation of RC flying.
Demo Download:http://www.phoenix-sim.com/images/demo/download_button_down.jpg
Demo Requirements

• Microsoft Windows 2000/XP/Vista
• 1.0 Ghz Pentium 3/4 or AMD Athlon/64 compatible processor
• 256MB system memory (RAM)
• 750MB free, uncompressed hard-disk space*
• ATI Radeon 9600/NVidia Geforce Ti4200 with at least 64 MB memory
• Microsoft DirectX 9.0c or higher*
• 100% DirectX 9 compatible sound card (optional)

• Microsoft Windows 2000/XP/ Vista *
• Microsoft DirectX9c or higher
• 1GHz 100% Pentium III/4 or AMD Athlon/64 compatible processor
• Geforce 4200/ATI 9600 with 128MB
• 100% DirectX compatible soundcard (optional)
• 256MB RAM
• 750MB free disk space
• CD-ROM/DVD (for install)
• Free USB 1.1/2.0 port

• New water system, featuring:
• 3D, Realtime-rendered realistic moving water
• Realtime reflections of models
• Realtime ripples from water interaction
• Improved water interaction physics and floatplane steering
• Streamlined multiplayer code for faster, more stable connections and less lag
• Several sceneries retouched and sharpened
• Shadow intensity accuracy improved
• Portuguese and Italian languages added
• Select alternate sound library from Audio Options
• Show Frame per second from View menu
• Zoom in on transmitter display under View menu
• Hitec Optic 6 profile added
• Hotkeys view added to View menu

• Camera panning improved when simulation is paused
• Tail rotor/gyro interaction improved for smoother, more precise tail reaction on helicopters
• Added Airtronics RD8000 profile
• Improved profile creation process
• Improved Ttransmitter/Interface connection warnings
• Improved rotor governor response
• Improved tail flick on light electric helicopters
• Added "Servo Delay" editable attribute under Tail section
• Added "Tail wash" editable attribute under Fine Tuning section
• Multiplayer error with incorrect model now shows an icon and does not eject pilot
• Improved spinning effects on rotors
• Improvement on lighting system
• Improved scrolling/lookaround when paused
• Preset CCPM demix for Esky 0406A in Advanced Calibration
• Bugs fixed

• Knight 3D issue with over 100% simulation speed fixed
• Wind random direction issue fixed
• Beriev flaps + description
• Spitfre wheels no longer penetrate canopy
• Lower blades on Blade CX2 blades no longer faces wrong way
• Various mapping profile creation, copying and deletion issues
• Do not restart handlaunched models when options for no restart is selected
• Reduced tail wash on T-Rex 500
• Fixed error in multiplayer when host changes to scenery not installed
• Fixed high/low wing trainer issue on long-grass flying fields

Filtered Fuel Tank Klunk L-IP181/10
Reduce the chance of air bubbles entering your engine with this clunk

3-1/2" 2Bl Spinner - Black (Each)E-RAA1009B

OMI Fuel Magnet - Designed by engine James O'neil
This simple little device soaks up every last drop of fuel from your tank.
It's especially good at giving consistent running throughout the tank as the foam sucks up the fuel always giving a constant supply to the engine.
Pretty much a must have item if you are flying 90s with a Cline!

HFSSTQ04 Spinner Cup (For Airplane)
Fits Align starter to allow you to start planes too.
Accessories:
Airplane Spinner Cup x 1
Starter Rubber x 1
Starter shaft O-Ring x 1

3/32"(2.3mm) Fl.Grn/Yel/Ora 3x750mm    L-ST200   
Ripmax Silicone Tube is tough, extra flexible and heat resistant. This material has great resistance to kinking and it will not harden with age. We have now introduced a pack containing three colours of fluorescent fuel tubing , supplied in 0.75 metre lengths, that will add a splash of colour to any car, boat or aircraft engine bay.

Sealing Iron Cover    T-RMX001/01

Custom Sealing Iron w/Alu Stand    T-RMX001
When you're covering with heatshrink film, you need a lightweight iron with an accurate temperature control. The Custom Sealing Iron holds its temperature superbly, fits the hand comfortably and has a coated shoe that glides over all types of shrink film and 'tex finishes. Supplied complete with plug and aluminium stand.

Strobe Light - Double F-RMX061
Fit this lightweight strobe unit to your scale or sport model to brighten up the skies over your flying field. The strobe frequency can be varied between 20 and 60 flashes per minute to give the required effect. Designed to be powered by a standard additional 4.8v receiver type battery pack.

Ripmax Nitro Start Up Set L-RMXNSS
A comprehensive pack containing the most useful items required when getting started with glow engine models. Set includes: 2100mAh Glowstart w/Charger, 350cc Fuel Bottle, Flathead and Phillips Head Screwdrivers, Small and Large Wrenches.