Irvine Voltspy 2P-VS01
The latest, compact, on-board voltage monitor that can be switched from 4.8 to 6.0v. It consumes very little current and has 7 highly visible LEDs. Its super thin shape and standard fitment JR plug suits both aircraft and helicopter installations.

Battery Protect  Specifications：
Auto cell detect for any 2 ~ 4 Cells。
Protects each monomer battery whether crosses the electric discharge,and weakens the dynamic output and the lamp signal police shows。
Battery low voltage (3.10V/3.30V)Winter/Summer Switch。
Battery low THRO收(10 % / 20 %)Heli / airplane Switch。
Voltage Resolution 0.01v。
Size : 29*14*6mm

SwitchGlo w/ alligator pigtail
SwitchGlo with alligator pigtail provides 8 inch glow/ground cable with an insulated mini alligator clip for your glow connection, and a ground lug.
Great for narrow, hard to reach locations.
Most popular with Helicopters.

The Phoenix RC simulator has been a huge success enabling a wide range of both Fixed wing and helicopter pilots to improve their skills with a sophisticated and life like representation of RC flying.
Demo Download:http://www.phoenix-sim.com/images/demo/download_button_down.jpg
Demo Requirements

• Microsoft Windows 2000/XP/Vista
• 1.0 Ghz Pentium 3/4 or AMD Athlon/64 compatible processor
• 256MB system memory (RAM)
• 750MB free, uncompressed hard-disk space*
• ATI Radeon 9600/NVidia Geforce Ti4200 with at least 64 MB memory
• Microsoft DirectX 9.0c or higher*
• 100% DirectX 9 compatible sound card (optional)

• Microsoft Windows 2000/XP/ Vista *
• Microsoft DirectX9c or higher
• 1GHz 100% Pentium III/4 or AMD Athlon/64 compatible processor
• Geforce 4200/ATI 9600 with 128MB
• 100% DirectX compatible soundcard (optional)
• 256MB RAM
• 750MB free disk space
• CD-ROM/DVD (for install)
• Free USB 1.1/2.0 port

• New water system, featuring:
• 3D, Realtime-rendered realistic moving water
• Realtime reflections of models
• Realtime ripples from water interaction
• Improved water interaction physics and floatplane steering
• Streamlined multiplayer code for faster, more stable connections and less lag
• Several sceneries retouched and sharpened
• Shadow intensity accuracy improved
• Portuguese and Italian languages added
• Select alternate sound library from Audio Options
• Show Frame per second from View menu
• Zoom in on transmitter display under View menu
• Hitec Optic 6 profile added
• Hotkeys view added to View menu

• Camera panning improved when simulation is paused
• Tail rotor/gyro interaction improved for smoother, more precise tail reaction on helicopters
• Added Airtronics RD8000 profile
• Improved profile creation process
• Improved Ttransmitter/Interface connection warnings
• Improved rotor governor response
• Improved tail flick on light electric helicopters
• Added "Servo Delay" editable attribute under Tail section
• Added "Tail wash" editable attribute under Fine Tuning section
• Multiplayer error with incorrect model now shows an icon and does not eject pilot
• Improved spinning effects on rotors
• Improvement on lighting system
• Improved scrolling/lookaround when paused
• Preset CCPM demix for Esky 0406A in Advanced Calibration

• Favourites issue fixed
• Knight 3D issue with over 100% simulation speed fixed
• Wind random direction issue fixed
• Beriev flaps + description
• Spitfre wheels no longer penetrate canopy
• Lower blades on Blade CX2 blades no longer faces wrong way
• Various mapping profile creation, copying and deletion issues
• Do not restart handlaunched models when options for no restart is selected
• Reduced tail wash on T-Rex 500
• Fixed error in multiplayer when host changes to scenery not installed
• Fixed high/low wing trainer issue on long-grass flying fields

http://www.youtube.com/watch?v=z5ROnOSypiY

MINI DV Spy Camera Video 720x480
Hidden Recorder Webcam High quality Worldwide 30FPS
Features
Smallest Pin-hole Camera made especially for spy use
External Memory: support the TF/Micro SD expansion card from 128MB to 8GB (Not included Memory Card)
Internal Memory: No
High definition video with voice lets
Color Video and Audio Recording
Video AVI Format 720 x 480 High Resolution (30fps)
Photo JPEG Format 1024 x  768 pixels
Playback video on your PC
Easy connection with PC/Laptops, no driver needed
Easy to use "One Touch" record button
USB Plug & Play Compatible
Built-in rechargeable high-capacity Lithium polymer
Battery Up Time: Approx. 1 Hour
Real time record any video and audio evidence instantaneously
Support system: Windows98SE/ME/2000XP/Vista/LINUX2.4 above and automatically distinguish operating system.
Dimension: 50 x 32 x 13mm
Package contents
1 x Key Chain Video Camera (Not included Memory Card)
1 x USB cable
1 x Manual in English

Optional extra : 4 G TF Card (Kingston)

USB SIMULATOR CABLES SET FMS 7.0
This is the FMS Universal Interface cable. This interface works very well with your computer's USB plug and connects to your transmitter via the training connector. The cable is also compatible with JR transmitters ( mini jack ) as well as Futaba, Hitec, E-Sky ( Not 6 Channel Only the 4 Channel ), & E-flite transmitters via the included adapters. Learn how to fly, or improve your existing flying skills with our new flight simulator interface. Great price. Perfect with Blade CP TX. May not work with Walkera (PCM TX)
Minimum system requirements:

• Window ME/2000/XP
• 100% Pentium III or AMD Athlon/64 processor more than 800mHz
• 128MB RAM
• 1GB fere of hard disc memory
• CD-ROM drive
• Open GL compatible graphic card at least 64MB
• 100% DirectX compatible sound card
• USB port

An all-purpose micro-processor controlled precision servo tester, for both analogue and digital servos. Ideal for checking servos for potentiometer wear or gearbox damage, and also for programming speed controllers.

A practical tool for setting servo neutral positions when installing the receiving system in the model. Features variable servo speed and automatic mode for continuous testing. Left / centre / right positions can be called up directly using the push-buttons. FM / HRS-FM modulation switching for testing analogue and digital servos.

This device is the best way to keep monitoring your engines running tempature, essential for break in's and running tempature thereafter. It will ensure a long life to a protected your engine.
Best buy !
RB8410 : Temperature Monitor
The temperature monitor is so small and light that it can be installed in virtually any model, in which case it can supply important information while the model is operating.The unit stores the minimum and maximum temperatures recorded in each measurement cycle. The unit´s measurement range of -50° C ... +280° C opens up a broad range of possible applications.

Specification: Weight: 12 g Dimensions: 40x20x11 mm

This is an Air Alert Flight Pack Monitor used as a Low Voltage and Lost Aircraft Alarm on Radio Controlled Aircraft.

FEATURES: Emits different sequences of "beeps" to signal potentially risky flight pack conditions.
            1. Low Battery Alarm- when flight pack voltage levels are low,
               to identify an impending power failure.
            2. Lost Airplane Finder- as a tracking device, when searching for
               a model that has crashed.
            3. Transmitter Inactivity Signal- if the respective Tx stick hasn't
               been moved for over one minute, warning that either the
               transmitter is not turned ON, or the receiver has not been
               turned OFF, or some other signal problem exists.
          For 4.8V battery pack ONLY.

Easy flush mounting inside or outside the fuselage. The ultra lightweight, micro-thin case is foam-cushioned for durability and to protect components inside.
Includes a Universal connector for use with most common radio systems such as Futaba J, Airtronics Z, Hitec S, JR, Tower Hobbies. 2-year warranty

INCLUDES: One Air Alert Flight Pack Monitor w/One Male and One Female
          Universal Connector
          One 13/16" square of double-sided tape
          One instruction card
REQUIRES: Plug Air Alert into receiver throttle channel, and throttle servo into Air Alert. Turn receiver ON. Air Alert will emit One Beep to confirm Power is ON.

• Width:            1-3/8"
• Height:             7/8"
  
• Weight:           .35oz (10g)
  
• Board Thickness:   3/16"
  
• Overall Thickness: 9/16" (with beeper)
  
• Wire Length:      5-1/2" (each wire)

COMMENTS: Air Alert is for 4.8V batteries Only.

The digital caliper is a precision tool for measuring an objects length, thickness, inside/outside diameters, depth. It has setting screw, sliding scale, vernier measure, stationary measure and depth probe. Digital Caliper is required to make many adjustments for both installation and setup. A caliper is the right tool for the job and with this digital caliper; a correct reading is always a click away. The caliper can be reset to zero and supports both Metric and Imperial unit systems. Special Design with SUPER SIZE LCD for great look and easy measurement reading.

• 150mm (6") measurement length.
• Hard plastic carrying case included
• Two batteries included
• On / Off Button Switch from Inch to Metric with a push of a button
• Accuracy up to 0.001"
• Resolution up to 0.005"
• Made of ALL stainelss steel with latest technology and latest design
• Excellent jaw geometry and accuracy
• Ergonomic design to facilitate measurements
• Super smooth measurement movements
• Operation Manual and Battery Included

It looks fancy and is compact in size
Very handy to use
It measures 2, 3 and 4-blade prop rpm
It shows 4 digits in a 0-32000 rpm range
It comes with a replaceable 3V 220mAH LITHIUM Battery
There is an auto shut-off function (no signal detected in 120 seconds)
When the LOW BATTERY icon is on, the battery needs to be replaced
It won't waste any electric power when the TACH is not in use.
This may prolong the life of the battery

Pocket scale is very essential and convient for hobbist which like to tinkers with their parts.  For those who love the micro helis, this pocket scale will be handy just to measure something other big scale cannot do accurately at such an affordable price.  Very stylish and elegant.

• Weight: 125g
• Accuracy: 0.1g
• Max weight: 500g
• Dimension: 127*78*22mm
• Equipped with a high precision strain-gauge sensor
• Large Digital LCD Display
• Automatic power-off
• Displays weight in oz, dwt, ozt, ct, gs (gn)
• Standard tare
• Stylish and very elegant.
• Manual Instruction included.Displays weight in oz, dwt, ozt, ct, gs (gn)

CellShield is a low voltage cutoff device which provides cell-by-cell protection for lithium battery packs. By monitoring each cell individually, CellShield prevents individual cell overdischarge due to pack imbalance or cell variations.

CellShield provides a soft cutoff when the lowest voltage cell of the pack reaches the set minimum voltage. The minimum voltage is adjustable from 2.5v/cell to 3.5v/cell. This lets you set the proper cutoff voltage for your specific pack. For example, 8-10C cells typically use a 3.0v/cell cutoff, while 20C cells work better with a 3.2v/cell cutoff. CellShield's cutoff voltage is set with an easy-to-use potentiometer. There are no programmers to buy or complicated programming procedures. With CellShield, you turn the arrow to the cutoff voltage you want and go fly.

CellShield also features optional thermal probes, which prevent pack damage due to overheating. When using the thermal probe, if the battery temperature rises above 150 degrees, CellShield will reduce the throttle command sent to the ESC in an attempt to bring the battery temperature back down. If the battery stays above 150 degrees, CellShield will enter soft cutoff mode. When using the thermal probe, CellShield alerts the user to temperature faults by flashing the red Temp light. The thermal probes are extremely thin, and can often be inserted between the innermost cells of the pack, where pack temperature is highest.

CellShield installs easily between your receiver and ESC. Simply plug the battery port on the CellShield into the tap connection on your battery, and it will automatically detect the number and cell order for any pack with .1" tap spacing. If you are running a battery with 2mm tap spacing like Thunderpower, a 2mm to .1" adapter is all that is required to use CellShield.  CellShield will then light an LED corresponding to the detected cell. You can even plug the battery tap in "backwards" and in any position, and CellShield will operate correctly. No soldering is required to install CellShield.

CellShield works with any ESC and power system except some opto-isolated ESCs when used with receiver batteries. For cell-shield to operate, the battery ground and radio ground must be at the same level. This is the case for all ESCs with a built in BEC (whether or not the ESC's BEC is being used) and all ESCs using external BECs.

For a solution that works with a wider voltage range, check out LipoShield.

CellShield is intended for aircraft with 0-100% style one direction only throttle. A future product will be aimed at cars.

Display 3 levels of battery voltages to warn modellers if the battery volatage is low via the receiver pack - not to be used for LiPo batteries. An essential tool for all helicopter flyers when it comes to monitoring the receiver pack voltage before and after flight.

Voltage: 4.8V-6V

Tail Servo Step-Down Voltage is ideally designed to step-down a voltage source of 6 volts that is outputted from any external BEC (battery eliminator circuit) down to 5.2 volts. This allows an external 6 volt BEC to be used with Futaba servo models 9241. 9251. 9253. 9254. 9255. 9256 and other digital servos that are not capable of handling 6 volts. The Tail Servo Step-Down Voltage is equipped with male/female servo plugs and is ideally used in series with the RC model's gyro and rudder servo to prevent any harmful damage or overloading to your servo. The Tail Servo Step-Down Voltage can also be used with any other applications that require a step down power voltage of approximately 0.8 volts

Ultra compact step-down voltage regulator cable to reduce 6V sources to a safe 5.2V to the rudder servo.
High power component to withstand current of up to 5 Amps continuous, 10 Amps peak.
Prevents harmful damage and overloading to the digital rudder/tail servo.

• Easy Height: 4 mm
  
• Width: 8 mm
  
• Length: 12 mm
  
• Weight: 4 grams installation.

For some servos such as Futaba servo models 9241, 9251, 9253, 9254, 9255, 9256 and other digital servos are not capable of handling 6V, please connect a 5.1V step-down voltage regulator to the rudder servo, or connect it between BEC (ex. RCE-B6X) and the receiver for all servos. It could avoid the servos overloading and damaged.
This knocks down your voltage 0.7 volts. It's called the 5.1 step-down because the Align regulator is 5.8v. 5.8v - 0.7v = 5.1v.
Specifications:
Max continuous current: 5A
Length: 104mm
Weight: 4.2g

To check the voltage of each cell of the battery.

• Size：44x20x9.5mm
  
• Weight：6g
• Display Accuracy：0.02V

Size: 41mm x 31mm x 8.9mm
Weight: 8g each ( Net Weight )
Suitable for 7.4v and 11.1v Li-polymer Battery
Check the unit cell voltage on the 7.4v or 11.1v Li-polymer Battery

When your Li-Po battery reaches 3.7 volt per cell it will buzz to inform you. Discharging beyond this voltage is bad for your battery.

• When testing full power(>3.7V) 2S(7.4V) lipo battery, 2 green LED keeping light.
• When testing full power(>3.7V) 3S(11.1V) lipo battery, 3 green LED keeping light.
• When voltage <3.15V, it will buzzer with red LED light.

Size : 20mm x 31mm x 18mm

Video camera includes audio, still photos, a voice recorder, USB drive, and a Webcam. Unit is small enough to mount on just about any model airplane, small parkflyers, RC cars, trains, skate boards, or even a kite. Can be remotely activated using an additional servo.

Videos are recorded with a resolution of 352x288 for clear playback, complete with sound, and 640x480 pixels for still photos. Camera lens rotates 90 degrees so you can take photos or video from multiple angles. Built-in rechargeable 150 mAh Li-Ion battery that charges via the USB port on your computer in about 1 to 1-1/2 hours.

With a 2GB SD card (not included) the video recording time is about 30 minutes. Webcam use requires the included software and USB cable. No software required for all other uses! You can edit and compress the .avi video files using Windows Movie Maker, included with Windows XP SP2 and Windows Vista.

The LED strobes will flash in sequence when the battery voltage is higher than the pre-set voltage (navigation lights). Then the LED  will become steady light when the battery voltage drops below the pre-set level (battery alarm). A built in tuning trim that allow the users to choose their desire cut off voltage (3.0v to 4.0v per cell).

• This battery alarm is suitbable to use with 7.4v and 11.1v lipo batteries.
• include Red, Green, Yellow netvigation LED and White head LED.

There are many benefits of using a Li-Po Alarm:

• It helps to prevent the over discharge the Li-Po battery.
• It tells you when to land your plane before the speed controller give you a cut off.
• And, you have nice Navigation light signal just like real scale planes does.

You can operate an aircraft with the same feeling of a pilot in the computer, experiencing the exciting flight of a real plane, and your dream flying freely in the blue sky deriving from your childhood come true! Come on! Challenge to be a pilot and enjoy the exciting!
This new simulator gives you real world flying experiences from your PC. Its Interlink Controller plugs into a USB port on your computer. It looks and feels just like a real transmitter. Especially without 8"AA" battery can directly work with computer.

• High-Performance, High-Realism 3D graphics and 3D sound effects
• Full 3D collision detection with all objects on the landscape, Many new landscapes
• Realistic 3D texture with transparency, reflection, shadows, and high-lighting
• Translated user interface with 18 languages
• Latest FMS CD Simulator Software, Latest version USB 1.0 / 2.0
• Model and Scenery Quick Parameters for fast customization
• Integrated Flight Recorder (for training and web demo videos)
• Designed for Windows 2000, XP, ME and 98

The SK360 replaces the mechanical flybar on your R/C Helicopter, making it lighter, fly longer on the same battery charge, and reducing replacement parts costs.   Ideal for scale and performance models alike. Go flybarless!
Throw out your "1940's-technology" mechanical flybar and replace it with a state of the art Digital Flybar. Rock solid hovering with a less complex, lighter rotorhead for more power or longer flight times!

The SK-360 Digital Flybar is a high performance, compact and lightweight electronic pitch and roll stabilizer for model helicopters of all sizes. Its function is to replace the traditional flybar (stabilizer bar) and its association linkages, boosting power, increasing flight times and reducing repair costs.

For 3D flying, dial up cyclic rates to the limit of blade stall, without losing any stability. This gives your heli lightning-quick 3D, with great performance in wind and a solid hover!

For Scale flying, cyclic rates can be dialed down for smooth, steady flight even in gusty wind. Both the look and the sound are more realistic. The SK360 flies great with 2, 3, 4, or 5 blades.

The SK-360 is a compact, single unit, and comes with a USB interface included. It weighs only 19 grams, and can be mounted upside-down, backwards, or sideways to fit in any heli.

The PC setup software lets you fully configure the swash mixing, servo motion, and stability. And, it's easy to upgrade the firmware at home so you'll benefit from any future product improvements with the click of your mouse. Plus, the setup software displays the precision PWM inputs and outputs, making it an excellent calibration tool for your servos and radio.(Note: For nitro helis, the SK360 has been tested up to 60 size)

Swashplate Options:

· Works with Digital or Analog servos
· Suitable for 120, 135/140, and 90 degree eCCPM, as well as mCCPM swashplates
· Mixing In-Gyro, but able to accept pre-mixed 120° swash input
· Swash Ring anti-binding algorithm
· Phase Trim adjustable to +-90°
· Swash servo-equalizing prevents uncommanded collective in aggressive maneuvers

High Performance:
· Synchronous, 12-bit precision (4096 step) PWM inputs from your radio
· Tightly grouped 12-bit servo PWM outputs for low swash motion error
· Super-accurate, crystal driven PWM timing
· Optional 125 Hz servo frame rate
· Minimal lag (just a few milliseconds)
· Individually temperature compensated
· Wide input voltage range (up to 8.5 volts)
· Weight is only 19 grams

Package Contents:
· SK-360 Gyro unit
· Three receiver connection cables
· Four strips of 3M-4408tm mounting tape
· USB Interface with jumper
· USB Extension Cable
· CD with Interface Software

Integral functions:
Tail rotor gyro
The HeliCommand unit features an integral high-quality heading-hold gyro. Of course, a separate gyro can also be used if you prefer.

Auto-trim
Another important feature is automatic trim; a button-press on the transmitter automatically neutralises the three control axes: pitch, roll and tail. For auto-pilot operations the trim is only necessary during the first flight (after installation). However the trim can also be used for manual control. Any reasonably smooth phase of flight lasting a minimum of seven seconds is sufficient for the automatic trim system to define correct trim values. The settings are stored, but they can also be revised and corrected at any time.

Swashplate mixer The HeliCommand unit incorporates a comprehensive integral swashplate mixer (H2, HR3, H4). This makes it possible to control all current types of helicopter using simple radio control systems (without swashplate mixers). In this case the display module or the PC adaptor and software is required in order to carry out adjustments. The mixer settings are entered using a new form of procedure which is very simple to operate; this saves the user the task of studying the menu system etc.

Pilot channel
The effect of the stabilising / positioning mode can be adjusted proportionally using a spare radio control channel; it can also be switched off completely for 3-D flying.

The in-flight switchable gain system offers three different positions: Stage 0 = Off (conventional)
Stage 1 = Attitude regulation (stabilisation)
Stage 2 = Position-holding and "ground-speed" regulation

The HeliCommand stabilizes the geographical position of the model helicopter it also stabilizes its flight attitude. The HeliCommand incorporates several control and measurement systems (triple axis gyros and an optical CCD sensor) to provide a superb of stability. It is ideal for the beginner. It adds a level of control and confidence that prior to this time has been unavailable to any model helicopter pilot. The HeliCommand provides a level of safety and accident reduction that previously has been unknown in the realm of helicopter modeling. Dual redundancy (in both the hardware and software programming) throughout was designed into the HeliCommand. In addition to all of the above the HeliCommand incorporates a full Failsafe unit incase of radio failure.

Integral functions:

• Tail rotor gyro - The HeliCommand unit features an integral high-quality heading-hold gyro. Of course, a separate gyro can also be used if you prefer.
• Auto-trim
• Swashplate mixer
  The HeliCommand unit incorporates a comprehensive integral swashplate mixer (H2, HR3, H4). This makes it possible to control all current types of helicopter using simple radio control systems (without swashplate mixers). In this case the display module or the PC adaptor and software is required in order to carry out adjustments. The mixer settings are entered using a new form of procedure which is very simple to operate; this saves the user the task of studying the menu system etc.
• Pilot channel
  The effect of the stabilising / positioning mode can be adjusted proportionally using a spare radio control channel; it can also be switched off completely for 3-D flying.
• The in-flight switchable gain system offers three different positions: Stage 0 = Off (conventional)
  Stage 1 = Attitude regulation (stabilisation)
  Stage 2 = Position-holding and "ground-speed" regulation
• Fail-safe
  High-quality fail-safe function with FM receivers. If the radio link fails, the fail-safe responds extremely quickly and almost continuously, setting the roll-axis and pitch-axis functions to neutral, whilst maintaining the collective pitch function at the last value.
• attitude stabilisation in inverted flight
• switchable support for brief 3-D manoeuvres.

The HeliCommand "Rigid-Stabi" is another version of the system:
In addition to all the functions of the Heli-Command 3D, this variant provides stabilisation for helicopters which are not fitted with a mechanical stabiliser bar (flybar). This applies, for example, to some scale machines and helicopters with multi-blade rotor heads. This special attitude-holding stabilisation reliably prevents the characteristic tendency of "flybar-less" rotor heads to balloon up abruptly.
Model helicopters with a rigid head are more agile, contain fewer parts and consume less motor power. The HeliCommand "Rigid" offers a broad field for experimentation in the future.