K10381A 5.1V Two-way Step-down Voltage Regulator €6 (+ postage of €2) For some servos such as Futaba servo models 9241, 9251, 9253, 9254, 9255, 9256 and other digital servos are not capable of handling 6V, please connect a 5.1V step-down voltage regulator to the rudder servo, or connect it between BEC (ex. RCE-B6X) and the receiver for all servos. It could avoid the servos overloading and damaged. This knocks down your voltage 0.7 volts. It's called the 5.1 step-down because the Align regulator is 5.8v. 5.8v - 0.7v = 5.1v. Specifications: Max continuous current: 5A Length: 104mm Weight: 4.2g Quantity: 12345678910 Buy Now: Li-Po Battery LED Display Voltage Tester for 1S-6S €8 (+ postage of €2) Specifications: Size: 49.5mm x 19.8mm x 9mm Weight: 5.8g each ( Net Weight ) Suitable for 3.7v to 22.2v Li-polymer Battery  Check the unit cell voltage on the 3.7v or 22.2v Li-polymer Battery Quantity: 12345678910 Buy Now: Up to 3 cell LI-PO voltage tester €6 (+ postage of €2) Specifications: Size: 41mm x 31mm x 8.9mm Weight: 8g each ( Net Weight ) Suitable for 7.4v and 11.1v Li-polymer Battery Check the unit cell voltage on the 7.4v or 11.1v Li-polymer Battery Quantity: 12345678910 Buy Now: Low Voltage Buzzer for 2S/3S Lipo Battery €5 (+ postage of €2) Size : 20mm x 31mm x 18mm Instructions: When testing full power(>3.7V) 2S(7.4V) lipo battery, 2 green LED keeping light. When testing full power(>3.7V) 3S(11.1V) lipo battery, 3 green LED keeping light. When voltage <3.15V, it will buzzer with red LED light. Quantity: 12345678910 Buy Now: Lipo Safe Bag (180 x 215 mm) €16 (+ postage of €3) The LiPo Safe is bag made of special fire-resistant materials that has the ability to contain a lithium polymer battery fire or charging mishap. place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they're in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe's fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe. The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap from 1 to 6 lipoly cells (1s to 6s). Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged. LIPO SAFE USING PRECAUTION Ensure that charger rate is properly set and polarity is correct Attach charging leads to battery Place battery in LiPo Safe towards the bottom Place LiPo Safe on non-flammable surface Route charge leads through vent at the top seam of the LiPo Safe Close top flap of LiPo Safe and press hook and loop closure fully closed Charge battery using proper charging practices Always practice extreme caution when charging and never leave a charging battery unattended Quantity: 12345678910 Buy Now: Hobbico Air Alert Flight Pack Monitor €19 (+ postage of €6) This is an Air Alert Flight Pack Monitor used as a Low Voltage and Lost Aircraft Alarm on Radio Controlled Aircraft. FEATURES: Emits different sequences of "beeps" to signal potentially risky flight pack conditions. Low Battery Alarm- when flight pack voltage levels are low, to identify an impending power failure. Lost Airplane Finder- as a tracking device, when searching for a model that has crashed. Transmitter Inactivity Signal- if the respective Tx stick hasn't been moved for over one minute, warning that either the transmitter is not turned ON, or the receiver has not been turned OFF, or some other signal problem exists. For 4.8V battery pack ONLY. Easy flush mounting inside or outside the fuselage. The ultra lightweight, micro-thin case is foam-cushioned for durability and to protect components inside. Includes a Universal connector for use with most common radio systems such as Futaba J, Airtronics Z, Hitec S, JR, Tower Hobbies. 2-year warranty INCLUDES: One Air Alert Flight Pack Monitor w/One Male and One Female Universal Connector One 13/16" square of double-sided tape One instruction card REQUIRES:Plug Air Alert into receiver throttle channel, and throttle servo into Air Alert. Turn receiver ON. Air Alert will emit One Beep to confirm Power is ON.SPECS: Width:    1-3/8" Height:    7/8" Weight:    .35oz (10g) Board Thickness:   3/16" Overall Thickness:    9/16" (with beeper) Wire Length:   5-1/2" (each wire) COMMENTS: Air Alert is for 4.8V batteries Only. Quantity: 12345678910 Buy Now: CellShield lithium cutoff device €29 (+ postage of €6) CellShield is a low voltage cutoff device which provides cell-by-cell protection for lithium battery packs. By monitoring each cell individually, CellShield prevents individual cell overdischarge due to pack imbalance or cell variations. CellShield provides a soft cutoff when the lowest voltage cell of the pack reaches the set minimum voltage. The minimum voltage is adjustable from 2.5v/cell to 3.5v/cell. This lets you set the proper cutoff voltage for your specific pack. For example, 8-10C cells typically use a 3.0v/cell cutoff, while 20C cells work better with a 3.2v/cell cutoff. CellShield's cutoff voltage is set with an easy-to-use potentiometer. There are no programmers to buy or complicated programming procedures. With CellShield, you turn the arrow to the cutoff voltage you want and go fly. CellShield also features optional thermal probes, which prevent pack damage due to overheating. When using the thermal probe, if the battery temperature rises above 150 degrees, CellShield will reduce the throttle command sent to the ESC in an attempt to bring the battery temperature back down. If the battery stays above 150 degrees, CellShield will enter soft cutoff mode. When using the thermal probe, CellShield alerts the user to temperature faults by flashing the red Temp light. The thermal probes are extremely thin, and can often be inserted between the innermost cells of the pack, where pack temperature is highest. CellShield installs easily between your receiver and ESC. Simply plug the battery port on the CellShield into the tap connection on your battery, and it will automatically detect the number and cell order for any pack with .1" tap spacing. If you are running a battery with 2mm tap spacing like Thunderpower, a 2mm to .1" adapter is all that is required to use CellShield. Suitable Thunderpower  CellShield will then light an LED corresponding to the detected cell.  You can even plug the battery tap in "backwards" and in any position, and CellShield will operate correctly. No soldering is required to install CellShield. CellShield works with any ESC and power system except some opto-isolated ESCs when used with receiver batteries. For cell-shield to operate, the battery ground and radio ground must be at the same level. This is the case for all ESCs with a built in BEC (whether or not the ESC's BEC is being used) and all ESCs using external BECs. For a solution that works with a wider voltage range, check out LipoShield.CellShield is intended for aircraft with 0-100% style one direction only throttle. A future product will be aimed at cars. Model: CellShield Specifications: Input voltage: 2s to 6s Lithium or Lithium PolymerCutoff voltage: 2.5V to 3.5V/cell adjustable Applications: Any plane without an effective lithium cutoff Quantity: 12345678910 Buy Now: Switch harness JR €5 (+ postage of €2) Switch harness for JR Quantity: 12345678910 Buy Now: Switch Harness with charge lead (3P) - Futaba €7 (+ postage of €2) Quantity: 12345678910 Buy Now: Charge Lead Banana Plugs / Deans Male Ultra €6 (+ postage of €2) This is the Great Planes Charge Lead with Banana Plugs and Dean's Male Ultra Connector. FEATURES: Charges a battery with a Dean's Female Ultra connector INCLUDES: One Great Planes Charge Lead with Banana Plugs and Dean's Male Ultra connector REQUIRES: Connecting between battery and charger SPECS: Maximum Recommended Current: 10A Connector #1: Banana Plugs Connector #2: Dean's Male Ultra Wire: 14AWG 150mm (5.9") long Weight: 26.45g (.93oz) Quantity: 12345678910 Buy Now: Conversion plug- Dean (T-plug) to JST €3 (+ postage of €2) Change small JST connectors to Dean connectors for better connection. Quantity: 12345678910 Buy Now: Conversion plug- JST to Dean (T-plug) €3 (+ postage of €2) Female dean connector to JST connector Quantity: 12345678910 Buy Now: 2mm Gold Connector Kit €5 (+ postage of €2) Consists of 3 male connectors 3 female connectors Heat shrink Quantity: 12345678910 Buy Now: Deans Connector €5 (+ postage of €2) The industry standard in high performance connectors. Rated number one by R/C Helicopter Action. The Deans Connector has less resistance, including the solder joints. A real need for your battery. Quantity: 12345678910 Buy Now: Heat Shrink Tubes 5mm OD /Length=200mm 8" (3pcs) €2 (+ postage of €2) Heat Shrink Tubing is Safer, neater, faster and also more dependable than electrician's tape, isalso more dependable. These are available in popular sizes and color Length: 200mm INCLUDES:3pcs of 200mm 5mm OD heat shrink in 3 colors Red, yellow and Blue Quantity: 12345678910 Buy Now: Heat Shrink Tubing Assortment €5 (+ postage of €2) Heat Shrink Tubing is Safer, neater, faster and also more dependable than electrician's tape, is also more dependable. These are available in popular sizes and color. Special 25mm diameter heat shrinks are included for ESC wraps. Length: 200mm One of the following diameter sizes:1.5mm, 3mm, 5mm, 25mm Quantity: 12345678910 Buy Now: Align/MegaPower Battery to TP balancer wire for 3S €4 (+ postage of €2) Convert your Outrage batteries to Align/MegaPower connertor for charging. Quantity: 12345678910 Buy Now: Align-DN-Align Reverse Balance Wire 3S €3 (+ postage of €2) Use to reverse polarity of the DN battery to Align Quantity: 12345678910 Buy Now: Thunder Power Battery to Align charger wire for 3S €3 (+ postage of €2) This is the balance wire to allow Thunder Power 3s 11.1V lipo batteries to be used with Align balancer/charger. Quantity: 12345678910 Buy Now: T Connector Of Series Connection €6 (+ postage of €2) This harness connects two battery packs in Series. For example, you can make 2 x 2200mAh 11.1v 3S1P packs into a single 2200mAh 22.2v 6S1P pack. Its an excellent and cheap way of buying larger lipos.It means you dont need to upgrade your charger, or if you have a crash and damage a cell the loss is far less than losing an entire 6S1P pack. Its the smarter way to run larger packs. Quantity: 12345678910 Buy Now: T connector of Parallel Connection €7 (+ postage of €2) This harness connects two battery packs in parallel. For example, you can make 2 x 2200mAh 11.1v 3S1P packs into a single 4400mAh 11.1v 3S2P pack. Its an excellent and cheap way of buying larger lipos.It means you dont need to upgrade your charger, or if you have a crash and damage a cell the loss is far less than losing an entire 3S2P pack. Its the smarter way to run larger packs. Quantity: 12345678910 Buy Now: Y-servos extension cable €6 (+ postage of €2) Quantity: 12345678910 Buy Now: Servo Extension cable €2.5 (+ postage of €2) Quantity: 12345678910 Buy Now: JST Connector Set (male & female) €4 (+ postage of €2) Quantity: 12345678910 Buy Now: Balance Charger Extension Cable €4 (+ postage of €2) Quantity: 12345678910 Buy Now: Ferrite with connector - JR €7 (+ postage of €2) Quantity: 12345678910 Buy Now: Ferrite with connector - Futaba €7 (+ postage of €2) Quantity: 12345678910 Buy Now: 24k gilt terminal - K10149A-1 €6 (+ postage of €2) 3mm Quantity: 12345678910 Buy Now: €3 (+ postage of €2) Male And Female,3.5mm Gold Connector w/o heat shrink Quantity: 12345678910 Buy Now: Servo line Color Black (1m) €4 (+ postage of €2) Great for tidy servo cable runs Quantity: 12345678910 Buy Now: Servo Line - Black and Dark Blue €4 (+ postage of €2) Handy for tidy servo wires Quantity: 12345678910 Buy Now: High Quality Double-Side Gyro Tapes (3pcs) 1"x2.5" €3 (+ postage of €2) High Quality double side tapes for Gyros and other electronics Size: 1"x2.5" (24.5mmx 63.5mm) Quality: 3pcs Quantity: 12345678910 Buy Now: WRL-STVR Western Robotics Tail Servo Step-Down Vol €7 (+ postage of €2) Ultra compact step-down voltage regulator cable to reduce 6V sources to a safe 5.2V to the rudder servo.High power component to withstand current of up to 5 Amps continuous, 10 Amps peak. Prevents harmful damage and overloading to the digital rudder/tail servo. Easy installation.Specifications: Height: 4 mm Width: 8 mm Length: 12 mm Weight: 4 grams Quantity: 12345678910 Buy Now: Remote Glow Unit €4.5 (+ postage of €2) The finishing touch to a scale model or ideal for use as a remote glow unit on any model. Suitable for most glow plugs. Quantity: 12345678910 Buy Now: USB SIMULATOR CABLES SET FMS 7.0 €14 (+ postage of €2) USB SIMULATOR CABLES SET FMS 7.0This is the FMS Universal Interface cable. This interface works very well with your computer's USB plug and connects to your transmitter via the training connector. The cable is also compatible with JR transmitters ( mini jack ) as well as Futaba, Hitec, E-Sky ( Not 6 Channel Only the 4 Channel ), & E-flite transmitters via the included adapters. Learn how to fly, or improve your existing flying skills with our new flight simulator interface. Great price. Perfect with Blade CP TX. May not work with Walkera (PCM TX)Minimum system requirements: Window ME/2000/XP 100% Pentium III or AMD Athlon/64 processor more than 800mHz 128MB RAM 1GB fere of hard disc memory CD-ROM drive Open GL compatible graphic card at least 64MB 100% DirectX compatible sound card USB port Quantity: 12345678910 Buy Now: Deans plug male and female set €3 (+ postage of €2) Deans Ultra PlugMale/Female SetCan handle over 100 amps continuouslyHigh quailty gold connectors Quantity: 12345678910 Buy Now: Multiplex Connector €3 (+ postage of €2) Multiplex ConnectorMale/Female SetPlug & Fly connectors Quantity: 12345678910 Buy Now: Futaba Connector Male/Female Set €3 (+ postage of €2) Futaba ConnectorMale/Female Set Quantity: 12345678910 Buy Now: EC3 plug €3 (+ postage of €2) 3.5mm connector, max continuous current: 80ATypically used as a battery connectorTwo per packet (female end) Quantity: 12345678910 Buy Now: Adaptor Lead for the Futaba 6EX / FF7 / FF9 / 14MZ €10 (+ postage of €2) Adaptor Lead for the Futaba 6EX / FF7 / FF9 / 14MZ Buy Now: Balance Plug Adapter Thunder Power to Align €4 (+ postage of €2) Balance Plug AdapterThunder Power / Flight Power Balance Plug (6s)to Align Balance plug (2-6s) Quantity: 12345678910 Buy Now: Trainer Lead (Square to Square)Fut P-TC-SQ €21 (+ postage of €4) Trainer Lead (Square to Square)Fut    P-TC-SQIf you're teaching someone to fly, there can be no safer or simpler system than by using a trainer lead between two compatible transmitters. If the student experiences a problem, control can be taken back by the instructor at the flick of a switch. Quantity: 12345678910 Buy Now: