EK5-0201 NOTE: It does not fit on stock main center hub.  It is for replacements of the whole CNC head.

EK5-0398

EK5-0208 Note: Will not work with stock Esky blade grips - use CNC Esky blade grips.

EK5-0202 For Model: EK1H-E008 ,EK1H-E010

EK5-0395 CNC feathering shaft is for the upgraded CNC rotor head only - not for stock rotor head.

Does not include washers and screws

Much stronger than the original

These are for plastic head (not for CNC head).  These have outter threads.

JGF400DH

• Max Current: 20 Amps.
• KV: 4400
• Weight: 42.1 grams
• Shaft Diameter: 2.3mm
• Mount holes: standard 16 & 19
• 3mm diameter, .5 pitch standard screws.

The motor 400DH is famous for its long flight times and ability to offer 3D manuveurs.  The 400DH has a great reputation, and it works best on the King V1 and King V2 with an 8T or 9T pinion.

ESK007

• Specially designed for Esky King 2 or similar sized helicopters.
• 4000kv, 20 Amp current draw
• Air Fan is included (can be removed if you like)
• Round banana plug is pre-installed which fits perfectly with Esky speed controller

EK5-0006 -  Use This brushless Motor For Honey Bee 2 and Belt-CP.

EK5-0005 - 100% NEW, ESky Upgrading Part

• Suitable For Esky Honey Bee, Honey Bee CP2, Honey Bee King II, Belt CP
• Improve Flight Time
• Improve Performance Dramatically

 EK5-0004

• Color:purple
• Motor weight:40g
• Motor length:28mm
• Motor diameter:25.9mm
• Shaft diameter:2.3mm
• KV:3100RPM/V
• Free load current:2.5A
• Max efficiency:80%
• Max current:13A
• Speed contorller requiement:25A

ESK003-W
Make of Hard Plastic Fiber, it is more flex than wood and can resist from small crash.
It is highly recommended to beginners and for those who don't do hard 3D flying.

Blade tracking sticker and spacers included.
Note: since this blade will generate larger lifting force than wood blades, you may need to trim down the hovering pitch a bit

EK4-0005-

• Size:275X33mm
• Root thickness: 6.25mm
• Blade thickness: 5mm
• Weight: 42g/pair

EK4-0151 - Lighter, faster cyclic response

EK4-0150  - Also for the Belt CP

ESK015 - The stock 9T tail pulley does not spin the tail blades enough, the 10T solves the problem

MH-HK026V2 The tail pitch lever is designed to provide zero slop and play with ultra smooth performance

 ESK014 - Bigger and flexable to help with bad landings with less breaks.

ESK012 - Strong light and rigid. No more cracked plastic frames

ESK005 - One of the best upgrades for the King 2
The stock tail rotor gear ratio of King 2 is not fast enough, this solves the problem giving superior tail holding. Paired with the Extreme Metal Tail Rotor Shaft (10T pulley) and a good gyro its unreal !!!

ESK005-B 

 ESK008 Users of King are saying that the stock plastic frame is 2 soft, especially at the motor mount.

Front Angled Battery Mount- King2 (used with ESK008 or ESK012)

ESK00 The stock anti rotation bracket rubs against the control link but no longer with this alu. bracket

 ESK004

ESK010-B

• 1 x transparent Canopy
• 1 x mono tone decal sheet
• 1 x masking sheet for painting
• 4 x rubber mount

SL400HK2 Essential tool to level your swashplate. Why need to eyeball when you have a perfect tool?
Works on most 450 sized helis too.

 MH-HK102V2  CNC machined 100% balanced, strong and rigid with a high quaility cluch bearing

Choose in options box Pinion size

EK4-0051

• Constructed of Fiberglass for Strength & Rigidity   
  Pre-Painted, Realistic Canopy   
  Clear, Scale Windows for Realistic Looks 
  Fixed Landing Gear for Practicality & Ease of Flight

EK4 0050 Airwolf Scalecabin