OUTRAGE NRG Transmitter Pack 2500mAH FUTABA/ JR/ SPEKTRUM NRGTX-25003
Capacity: 2500mAH
Size : 100x32x37 mm
Weight : 167g (With Wire)
Pack Configuration: 3S1P
Voltage: 11.1V
Futaba transmitter connectors installed

only charge with Lipo charger and do not charge the battery inside the transmitter compartment.Always charge the lipo outside.
For Charging, AM-4002A (Futaba) or AM-4002B (JR) Leads Can Be Used.
Compatible with these radios
Spektrum: DX6, DX7, DX5 SE
JR: 6102, 9303, and any JR transmitter that has the small "white" connector on the EOM battery.
Futaba: 10C 12FG, 7C
NOT COMPATIBLE with these radios
Spektrum: DX6i
JR: 10X, 12X
Futaba: 12Z, 14MZ, 9Z

MEGAPOWER Li-Po Transmitter Pack 2600mAH for FUTABA JR SPEKTRUM MP2600013FJ
Features:
High capacity brings super long flight time on one charge
Lighter weight than stock battery releaseingstress on fingers and wrists
Comes with balance connectors to bring safety to users
Comes with both JR SPEKTRUM DX7 and FUTABA transmitter battery jacks
so you can use either on your DX7 or on Futabe radios! NEW!!!
Direct fit into most Futaba and JR Spektrum transmitters
Specifications:
Size: 100x30x30mm
Capacity: 2600mAH
Type: 3s1P
Weight: 160g

OUTRAGE NRGRX 2S1P 7.4V 2500mAH -SPEKTRUM/JR/FUTABA RECEIVER BATTERY NRGRX-25002
Capacity: 2500mAH
Size : 100x32x18 mm
Weight : 115g (With Wire)
Pack Configuration: 2S1P
Voltage: 7.4V
Thunder Power charging type Balance Connector and JST
Futaba Receiver connector pre-installed to work on Futaba receivers (trim the tab on Futaba receiver connector to work on JR receiver)
EC3 connectors pre-installed to work directly with the Spektrum AR9100 9-channel receivers and Spektrum VR6010 voltage regulators.
Conversion adaptor provided so can charge this receiver battery from Align charger or any XH type balance charger.

Extremely powerful
Very light weight compared to all other available packs on the market
Very compact size
Thunder Power type balance connector pre-install
EC3 connectors pre-installed to work directly with the Spektrum AR9100 9-channel receivers and Spektrum VR6010 voltage regulators.
Connectors provided JR/FUTABA and JST
Very long flight time per charge
No puff

OUTRAGE NRGRX 2S1P 7.4V 3600mAH - SPEKTRUM/JR/FUTABA RECEIVER BATTERY NRGRX-36002
Capacity: 3600mAH
Size : 112x47x16 mm (0.59 x 1.81 x 4.33inches)
Weight : 165g (With Wire) (5.6 oz)
Pack Configuration: 2S1P
Voltage: 7.4V
Thunder Power charging type Balance Connector and JST
Futaba Receiver connector pre-installed to work on Futaba receivers (trim the tab on Futaba receiver connector to work on JR receiver)
EC3 connectors pre-installed to work directly with the Spektrum AR9100 9-channel receivers and Spektrum VR6010 voltage regulators.
Conversion adaptor provided so can charge this receiver battery from Align charger or any XH type balance charger

OUTRAGE NRGRX 2S1P 7.4V 5000mAH - SPEKTRUM/JR/FUTABA RECEIVER BATTERY NRGRX-50002
Capacity: 5000mAH
Size : 112x47x13 mm
Weight : 235g (With Wire)
Pack Configuration: 2S1P
Voltage: 7.4V

LiPo Receiver Battery 2300mah 7.4v
New design shorter than standard battery protecting it in a crash, super quality!

• Rx23002S2P
• With JST Connector
• Typical Capacity: 2300mAh
• Standard Voltage: 7.4 V
• Dimension: 30 x 52 x 30 mm
• Pack Weight: 94 gram (with wires&plugs)

NEW! Arrowind 2300mAh Transmitter Pack

• With Futaba and JR plugs  !
• Capacity: 2300 mah
• Voltage: 11.1v
• Dimension: 48 x 88 x 8 mm
• Weight: 139 gram
• Plug: Futaba and JR

NEW!!!
TX lipo for transmitter Futaba T12FG/14MZ
Arrowind 3000mAh Transmitter Pack
Nowadays, some of the advanced Transmitter working voltage has been changed to 7.4V other than 11.1v. such as Futaba 12FG, 14MZ, that's how come of our new item TX-30002s1p!
With Futaba and JR plugs !

• Capacity: 3000 mah
• Voltage: 7.4v
• Dimension: 41 x 77 x 17 mm
• Weight: 117 gram
• Plug: Futaba and JR

4.8V 2200mAh Ni-MH Rx Pk Flat O-HE4N2200AASF Receiver Pack

Special !
4.8V 1100mAh Rx Pk Flat  O-4K1100AAUSF Receiver Pack

Sanyo Eneloop AA size, Rechargeable Ni-MH Battery
New SANYO technology enables Eneloop batteries to enjoy very low self discharge rates compared to traditional rechargeable batteries.
It is a very good choice to use as transmitter battery.
Self discharge is what happens to an electrical charge over time when not in use.
It affects all batteries but is more noticeable in rechargeable batteries.

As a general rule, standard rechargeable batteries lose or 'self discharge' 1% of their charge per day when left unused. For example, rechargeable batteries left in an unused digital camera or a drawer for over 3 months often need to be recharged before use.
In comparison, batteries with Eneloop technology lose only 15% of their charge within one full year - maintaining 85% of its original charge.

Eneloop AA battery x 8 pcs (2000 mah)Immediately usableCan be use 1,000 times over economicallyLow self-discharge rate, energy can be stored for longhigh power capacityDisplay superior power characteristics even in low temperature conditionCan be recycled

Lipo Safe Bag (180 x 215 mm)
The LiPo Safe is bag made of special fire-resistant materials that has the ability to contain a lithium polymer battery fire or charging mishap. place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they're in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe's fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.


The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap from 1 to 6 lipoly cells (1s to 6s).

Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged.

Attach charging leads to battery
Place battery in LiPo Safe towards the bottom
Place LiPo Safe on non-flammable surface
Route charge leads through vent at the top seam of the LiPo Safe
Close top flap of LiPo Safe and press hook and loop closure fully closed
Charge battery using proper charging practices
Always practice extreme caution when charging and never leave a charging battery unattended