Click here to see it go
UL-1 Superior RTR 2.4 (Red/Yellow)    B-AQUB20   
The racing RTR with all the extras — and no equals!
There's never been a LiPo-ready hydro with brushless power and 2.4GHz technology — until now. The UL-1 Superior has been designed in the U.S.A. to deliver today's best in cutting-edge control, brushless performance and competition-quality features!
Features high-performance GrimRacer hardware and an optimized-for-brushless hull design developed by Mike "Grimracer" Zaborowski!
Includes a brushless marine motor and ESC custom-designed to meet UL-1 performance requirements.
Drive system uses a standard 0.150" flex drive and 3/16" prop shaft to provide race-quality response and reliability.
Ideal for IMPBA and NAMBA FE Sport Hydroplane Class events.
Water-cooled, 36-56-2030kV Brushless Marine Motor
The 6-pole, 36-56-2030kV brushless motor is an AquaCraft design created exclusively for the UL-1 and high-speed hauling. Includes gold-plated, 4 mm motor plugs to boost efficiency.
Waterproof, Water-cooled 60A ESC
Inside its aluminum case, the UL-1 ESC is waterproof, water-cooled and capable of handling 60A current loads with ease. While compatible with NiCds and NiMHs, it offers two safety features tailored just for LiPo packs: a "stutter bump" warning at 12V and automatic cut-off at 11.6V.
Specification
Beam:    14.25 in (360 mm)
Length:    29.25 in (745 mm)
Height:    6.75 in (170 mm)
Weight:    4.88 lb (2,210 g)

Click here to see it go
SuperVee 27 Brushless RTR B-AQUB17
Brushless motors are the hot new power source in R/C, and AquaCraft is
leading the way in boat racing with the SuperVee 27! Right out of the box,
the SuperVee 27 boasts the extreme speed and performance to be a worthy
competitor in FE (Fast Electric) racing classes. But it's also easy enough for
beginners to operate, and it comes completely assembled, so you can be
just minutes away from scalding offshore action!
Choose your favourite from six dazzling hull colors!   
Specification
Electric Motor:    AquaCraft B36-56
Length:    686mm
Width:    205mm
Height:    140mm

Click here to see it go
Hammer EP RTR - White    B-AQU921A1
There's a right tool for every job — and when the job is diving straight into offshore action, the only tool you need is the Hammer RTR. No assembly or finishing is needed and all the on-board electronics come already installed. It's an easy way to break into R/C boating... and a rush for experienced skippers, too!
Radio and drive equipment come already installed from the rudder servo and reverse-equipped electronic speed control to the water-cooled, 550 size electric motor
The waterproof radio compartment features a screw down cover that allows easy access to the on-board radio gear
Realistic deep vee racer looks – complete with twin cockpits – add to the excitement
Done carving into the current for the day? Admire the Hammer at home on its supplied display stand!   
Specification
Electric Motor:    550 Size
Beam:    220mm
Length:    24 in (610 mm)

Click here to see it go
Joysway Off-Shore Warrior - Black    B-JS-9301B
Introducing the Joysway Off-Shore Warrior electric brushless boat!
The Joysway boats are perfect for your local pond, river or model boating area. Seriously fast, easy to control and great fun... but don't be fooled into thinking they are toys, because they aren't!
With an extremely durable fiberglass hull, water cooled brushless motor and ESC, installed steering servo and precision CNC machined anodised hardware these are serious competitors - They even come with a free boat stand for maintenance!
All preassembled, just add the receiver, transmitter and 3 cell LiPo battery of your choice to get running and available in different colours to suit your personal taste and allowing you to race your friends!
Just watch the video and you'll be sold!
Specification
Electric Motor:    3000KV Brushless (Inc.)
S/C Rec:    30A (Inc.)
LiPo:    Intellect 3S1P 11.1V 2500mAh 25C (Rec.)
Width:    125mm
Length:    450mm
Weight:    550g

Click here to see it go
Joysway Sea Rider Catamaran - Black    B-JS-9302B
Introducing the Joysway Sea Rider electric brushless boat!
The Joysway boats are perfect for your local pond, river or model boating area. Seriously fast, easy to control and great fun... but don't be fooled into thinking they are toys, because they aren't!
With an extremely durable fiberglass hull, water cooled brushless motor and ESC, installed steering servo and precision CNC machined anodised hardware these are serious competitors - They even come with a free boat stand for maintenance!
All preassembled, just add the receiver, transmitter and 3 cell LiPo battery of your choice to get running and available in different colours to suit your personal taste and allowing you to race your friends
Specification
Electric Motor:    3000KV Brushless (Inc.)
S/C Rec:    30A (Inc.)
LiPo:    Intellect 3S1P 11.1V 2500mAh 25C (Rec.)
Width:    130mm
Length:    450mm
Weight:    600g

Click here to see it go
Joysway Sea Drifter Hydro - Red    B-JS-9303R
Introducing the Joysway Sea Drifter electric brushless boat!
The Joysway boats are perfect for your local pond, river or model boating area. Seriously fast, easy to control and great fun... but don't be fooled into thinking they are toys, because they aren't!
With an extremely durable fiberglass hull, water cooled brushless motor and ESC, installed steering servo and precision CNC machined anodised hardware these are serious competitors - They even come with a free boat stand for maintenance!
All preassembled, just add the receiver, transmitter and 3 cell LiPo battery of your choice to get running and available in different colours to suit your personal taste and allowing you to race your friends!   
Specification
Electric Motor:    3000KV Brushless (Inc.)
S/C Rec:    30A (Inc.)
LiPo:    Intellect 3S1P 11.1V 2500mAh 25C (Rec.)
Width:    225mm
Length:    450mm
Weight:    600g

Click here to see it go
Marlin Cruiser RTR  B-CBM0003
As soon as you open the box, you can see that the Marlin is a great looking cruiser. Get it on the water and you'll also discover its terrific performance! With Compass Boat Models' usual attention to detail, the Marlin comes completely factory assembled with a powerful 540 class motor, two channel radio with electronic speed controller pre-installed and a 7.2v rechargeable battery and mains charger. Everything you need except for a set of AA cells for the transmitter.Marlin's tough, pre-formed ABS hull has a large hatch for easy access to the battery and running gear and it is supplied complete with a handy display stand.   
Specification
Electric Motor:    540 Class
Beam:    190mm
Length:    675mm
Height:    260mm

Click here to see it go
Capricorn 54 RTR     B-CBM151170
You'll be in the water and racing at full speed in no time at all because the Capricorn comes out of the box Ready For Fun! The radio system and all electronics are factory installed, so the only thing you have to do is charge and install the battery - both the charger and battery are included - and head to the shore.
Powered by a 540 motor and a 6-cell 7.2v battery, Capricorn is perfect for large pools, lakes and ponds. Absolutely ideal for newcomers because of its simplicity but also suited to the more experienced due its superb performance.
No long list of extras required to get the Capricorn 54 running... all you need is 6 AA pencels for the transmitter, and nothing else   
Specification
Electric Motor:    540 Class
Beam:    178mm
Length:    762mm

Click here to see it go
Mini Rio B-AQUB15
Perfect even for small ponds, the Mini Rio makes it easy to make waves. It's low-priced and ready-to-run, with sturdy ABS construction and a watertight, low-maintenance design. There's plenty of sizzle in the Superboat styling to turn serious racers' heads...plus a Dual Wedge rudder that delivers precise turning power for an untouchable edge!
Ready-to-run, no building required
Easy to manoeuvre for realistic, non-stop racing action
Durably designed for low maintenance and long run times

Details:
Includes: 2-channel AquaCraft FM pistol grip radio with waterproof receiver and 1 mini servo; 380-size water-cooled motor; waterproof electronic speed control; 1100mAh NiMH battery; 12V DC charger
Requires: 8 "AA" batteries for the transmitter
Includes a high-quality AquaCraft 2-channel FM radio.
Converts easily for left- or right-hand use.
Proportional throttle and steering.
Audible low battery alarm.
Steering trim control knob.
Assembled and complete with:
380-size water-cooled motor
Electronic speed control
1100mAh NiMH battery
12V DC peak charger
Pre-applied decals   

Click here to see it go
Atlantic Harbor Tug Boat RTR    B-AQU959
Years ago, the only models to offer this level of realism were expensive kits that required years of experience and months of work. But with the Atlantic Harbor Tugboat, it takes only minutes to be under way in a vessel that would look completely natural in any harbour setting. On the water, on the shore, or resting at home on its custom display stand, the Atlantic Harbor Tugboat is a showpiece that any modeller would be proud to own.The hull and cabin are one-piece designs and all details are factory applied. Finishing is either complete or unnecessary. The fibreglass hull is already painted and supplied in a gloss finish for easy maintenance. Modelled with scale details taken from real working tugs, from bitts on the deck to working lights on the mast!
Required for operation:
(Not included): 6 or 7 cell NiCad or NiMH battery, Charger, 10 AA Batteries.   
Specification
Beam:    9.8 in (250 mm)
Length:    30.3 in (770 mm)
Height:    19 in (485 mm)

Click here to see it go
Bristol Bay Fishing Boat RTR    B-AQU960   
From the cloth sails to the wood deck, the Bristol Bay captures the look and feel of an authentic working fishing vessel. But for all the scale detail that this boat has, there's very little to do when you take it out of the box. And if you think this model looks great on display, wait till you (and your friends) see it in action at your local boat pond!
No building required – just install the mast and connect the pre-numbered rigging lines.
Highly realistic, it features authentic scale detailed parts that are pre-assembled and pre-painted — plus working lights. Supplied with a 2 channel radio, 550 size motor and electronic speed control with forward and reverse already installed.
Required for operation (Not included):
6 cell 7.2v NiCad / Ni-MH battery, Charger, 8 AA batteries for transmitter, 2 AA batteries for boat lights.   
Specification
Beam:    8.75 in (222 mm)
Length:    33.5 in (851 mm)
Height:    29 in (737 mm)

Paradise Yacht RTS - Red    B-AQU901A3
It's the ultimate R/C pleasure cruise! Not only does the Paradise come with
radio system already installed, but even the rigging has been done for you.
Factory-finished, the model requires no sanding or painting... and because
it's powered by the breeze, you'll need nothing more than a few ordinary
"AA" batteries to get your voyage under way.
Assembles quickly — factory-finished, with radio gear and ballast
installed
Lightweight, strong fibreglass hull arrives beautifully factory-finished
Low-drag keel and boom disconnect for easy transporting
Sail for pleasure — leave work behind.....
Required for operation (Not included):
12 AA batteries.

Click here to see it go
Hooben Perkasa 1:32 ARTR B-HB020
The Perkasa was the lead boat of a class of four vessels built by Vosper Thornycroft in Southampton for the Royal Malaysian navy in 1967. Four others were built for the Royal Navy.
The original was powered by three Rolls Royce Proteus gas turbine engines of 4250HP each, giving a maximum speed of 54 Knots. Two smaller diesel engines were used for slow speed manouevring.
Armament consisted of one 40mm Bofors gun, one twin 20mm Oerlikon, anti-aircraft machine gun and four 21" torpedos on side mounts.
The model has a blow moulded hull with integral deck, giving great strength, durabilty and effectice waterproofing. The top cabin and detail parts are made of injected styrene and etched brass, which have been expertly built in the factory into an amazingly detailed representation of this powerful torpedo boat. All the hard work has already been done! Although the vast majority of the detail is already there in the model, there is still scope for the owner to add something more. If you decide to fit a third motor system to make her really scale, please remember that you will need an ESC of at least 100A and the rudders will have a reduced effect.
Even the painting has been hand sprayed at the factory in authentic colours to ensure that you get a stunning model, straight out of the box.
The model is supplied with two 550 size, brushed motors plus mounts, shafts and propellers. A compatible ESC will be available as an optional item. All you will then need is basic 2-Channel radio and a 6 cell Nimh battery pack of around 2500mAh or more. We recommend the KMS 80A Twin Marine ESC, Hi-Energy 6 cell 3300mAh Nimh and Sanwa Dash Saber radio.
A range of optional items will be available soon such as;
Torpedo Launch (yes, the torpedos are driven!!)
Turret Rotation
Light system
Sound generator
Use of optional items may require more channels in the radio system.
If you are a scale boat modeller, the Hooben Perkasa is going to be irresistible!   

Specification
Length:    959mm (37.75in)
Radio System:    2 Channel (1 servo) Required
Electric Motor:    2 x 550 Class Brushed (Included)
NiCad/Ni-MH:    6 Cell Hi-Energy 3300mAh Recommended
Beam:    243mm (9.57in)
Scale:    1:32
S/C Rec: KMS 80A Twin Marine Recommended

Click here to see it go
Mini Thunder Round Nose Hydropl.RTR    B-AQUB16   
Stir up the pond with this completly and ready to run round nose "thunder boat" hydroplane. A retaining pond or any nearby small body of water is a great place to run!
Includes:
2-Channel AquaCraft FM pistol grip radio
Waterproof receiver
Mini servo
380-size water-cooled motor
Waterproof electronic speed control
1100mAh NiMH battery
12V DC charger

Tornado 80 Wooden R/C EP Speed Boat    B-ARS-8002   
Based on 1950s era planked hull speed boats, the Tornado 80 is designed as a performance racer with oldfashioned charm! The built-up wooden hulls are fibreglass reinforced and resin treated for longer life.   

Specification
Length:    800mm
Weight:    1700g
Radio System:    2 channel
Beam:    300mm

Click here to see it go
Shark Submarine(1979 or 82)21"    B-2172
This semi-scale model of a research submarine is intended for the experienced modeller. The submarine dives dynamically using the vanes at the front and the recommended power unit propels the Shark at high speed. The running characteristics of the submarine are comparable to
those of a powered plane in flight. Using an efficient Speed 500 motor, coupled with experienced piloting, the Shark can be made to jump out of the water to a height of over 50 centimetres! The two part hull is moulded in plastic for ease of construction and, to increase the scale appearance in the water, can be fitted with a bow mounted searchlight that can be controlled by an additional R/C function, if desired.
Required for Operation (Not included):
3~4 Channel radio control with 1 servo and electronic speed controller (Min. 26Amp), 7.2v 1700~3800mAh NiCad / Ni-MH battery and charger.   

Specification
Length:    650mm
Height:    300mm
Weight:    980g
Electric Motor:    540 Class
Beam:    170mm
Skill:    Advanced

Click here to see it go
Sling Shot RTS 360mm Euro Version    B-CBM151161/EUR   
Completely Built and Ready-to-Run
2 Channel FM Proportional Radio Control System
Proportional Speed Control
380 Size 'Black-Can' Electric Motor
7.2v 900mAh Ni-MH Battery
AC Charger (4.5 hour charge time)
Easy-Access Rubber Hatch Cover
Note: Sling Shot has Forward Only Operation.

Includes Radio, Battery & Charger.
Required for operation
(Not included):
6 x AA Alkaline Batteries (for Tx).