Curtis Youngblood 710mm SB YEI-YB-710SB
This is a pair of 710mm "Stick Banger" Radix main rotor blades from Curtis Youngblood Enterprises. Radix blades fly light and quick for aggressive 3D but they still do forward flight like they are on rails. In addition to their smooth precise flight characteristics they are also one of the quietest blades in the air.
To top it off they auto great, the perfect combination for a 3D blade. Measuring 64x710mm with a 12 mm root these blades come with spacers to adapt to 14m grips and will fit both 4 and 5mm mounting bolts. Blades weigh approximately 185g each.
These 710mm blades are lighter than most 710mm blades so will have improved cyclic response combined with excellent autos.
Curtis Youngblood 690mm Radix blades YEI-YB-690
Radix blades fly light and quick for agressive 3D but they still do forward flight like they are on rails. In addition to their smooth precise flight characteristics they are also one of the quietest blades in the air. To top it off they auto great. The perfect combination for a 3D blade.
Length: 690mm
Root: > 12mm
Width: 64mm
Hole: 4-5mm
Weight: 470g
600 Radix Blades YB600
Radix blades fly light and quick for agressive 3D but they still do forward flight like they are on rails.
In addition to their smooth precise flight characteristics they are also one of the quietest blades in the air.
To top it off they auto's great. The perfect
combination for a 3D blade.
Curtis Youngblood 350mm Radix Blades YEI-YB-350
The perfect addition to your electric helicopter. 350mm blades perfect for Rave 450 sized helis.
For an aggressive 3D setup we recommend running at full control extremes (maximum pitch range and cyclic ranges). This will give a lively yet very stable feel. Even in hard 3D they remain quiet and are hard to overload with extreme controls.
Radix 92mm Tail Blades - YEI-YB-92
Radix Tail blades are light, rigid and CG corrected. Each length of our tail blades will give you optimum pirouette, holding and stopping power.
Also Available in: 105mm and 92mm
Blade Specs:
- Length bolt hole to tip: 92mm
- Root Details
- Root: 5mm
- Washers included for: 8mm root
- Bolt Hole: 3mm
- General Notes
- Washers included in lid of box.
- All tail blade sets are pre balanced and ready to fly.
Radix 95mm Tail Blades - YEI-YB-95
Radix Tail blades are light, rigid and CG corrected. Each length of our tail blades will give you optimum pirouette, holding and stopping power.
Also Available in: 105mm and 92mm
Blade Specs:
- Length bolt hole to tip: 95mm
- Root Details
- Root: 5mm
- Washers included for: 8mm root
- Bolt Hole: 3mm
- General Notes
- Washers included in lid of box.
- All tail blade sets are pre balanced and ready to fly.
Stubz 3mm Paddles YEI-STZ3105
Designed and Flown by Mulit-Time World Champion Curtis Youngblood. These paddles provide aggressive response but still fly very stable in fast forward flight.
Make sure to set cyclics at maximum throws, and the highest flybar ratio for best performance. Also paddles fly best at a higher RPM.
Stubz 4mm Paddles YEI-ST4
Designed and Flown by Mulit-Time World Champion Curtis Youngblood. These paddles provide aggressive response but still fly very stable in fast forward flight.
Make sure to set cyclics at maximum throws, and the highest flybar ratio for best performance. Also paddles fly best at a higher RPM
Stubz 5mm Paddles YEI-STZ5105
Designed and Flown by Mulit-Time World Champion Curtis Youngblood. These paddles provide aggressive response but still fly very stable in fast forward flight.
Make sure to set cyclics at maximum throws, and the highest flybar ratio for best performance. Also paddles fly best at a higher RPM.